はじめに

The logic board bracket holds the trackpad control cable connector and the AirPort/Bluetooth connector securely to the logic board.

Unplug your MacBook Air and power it off before you proceed.
  • Unplug your MacBook Air and power it off before you proceed.

  • Remove ten Phillips screws securing the lower case to the MacBook Air:

    • Six 2.8 mm screws

    • Two 3.8 mm screws

    • Two 5.4 mm screws

コメントを追加する

Slightly lift the lower case near the vents and push it toward the rear of the computer to free the mounting tabs.
  • Slightly lift the lower case near the vents and push it toward the rear of the computer to free the mounting tabs.

コメントを追加する

  • Disconnect the battery connector by pulling it straight out of its socket.

コメントを追加する

  • Remove the following nine screws securing the battery to the Air:

    • Four 2.9 mm Phillips.

    • Four 3.8 mm Phillips.

    • One 7.2 mm Phillips.

コメントを追加する

  • Lift the battery out of the Air.

コメントを追加する

  • Remove the two small Phillips screws securing the logic board bracket to the upper case.

コメントを追加する

  • Lift the logic board bracket out of the upper case.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

Walter Galan

564,831 ポイント

1,203のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 22

今までの合計 9,005