メインコンテンツにスキップ

はじめに

Prerequisite-only guide to replace the trackpad cable in a 2019 MacBook Air.

パーツ

パーツは指定されていません。

  1. Carefully slide an opening pick under the trackpad cable to separate the adhesive securing it to the upper case. If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer to soften the adhesive. If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer to soften the adhesive.
    • Carefully slide an opening pick under the trackpad cable to separate the adhesive securing it to the upper case.

    • If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer to soften the adhesive.

  2. Use the flat end of a spudger to lift the small locking flap on the trackpad ZIF connector. Slide the trackpad cable straight out of its connector. Slide the trackpad cable straight out of its connector.
    • Use the flat end of a spudger to lift the small locking flap on the trackpad ZIF connector.

    • Slide the trackpad cable straight out of its connector.

  3. Carefully slide an opening pick under the trackpad cable to separate the adhesive securing it to the battery. If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer. Be careful not to overheat the battery.
    • Carefully slide an opening pick under the trackpad cable to separate the adhesive securing it to the battery.

    • If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer. Be careful not to overheat the battery.

終わりに

To reassemble your device, follow these instructions in reverse order.

Adam O'Camb

メンバー登録日: 2015年04月11日

146,015 ポイント

417のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

141 メンバー

17,044のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 42