メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Mac mini Model A1283 Audio Board Replacement

必要な工具と部品

  1. Mac mini Model A1283 Audio Board Replacement, Top Housing: 手順 1、 2の画像 1 Mac mini Model A1283 Audio Board Replacement, Top Housing: 手順 1、 2の画像 2
    • Power down your Mac mini, disconnect all of the cables, and flip it over.

    • Insert the Jimmy into the crack between the aluminum top housing and the plastic lower housing.

    • The Jimmy should reach a stop about 3/8" down.

  2. Mac mini Model A1283 Audio Board Replacement: 手順 2、 3の画像 1 Mac mini Model A1283 Audio Board Replacement: 手順 2、 3の画像 2 Mac mini Model A1283 Audio Board Replacement: 手順 2、 3の画像 3
    • Gently bend the Jimmy outwards to pry the crack open a little larger and lift the lower housing up a small amount.

    • There are several plastic clips on the lower housing that fit into a channel in the aluminum top housing. Your goal is to use the Jimmy to push these clips inward enough to free them from the channel, while gently pulling up on the lower housing.

  3. Mac mini Model A1283 Audio Board Replacement: 手順 3、 2の画像 1 Mac mini Model A1283 Audio Board Replacement: 手順 3、 2の画像 2
    • Once you have the first side free, rotate the Mac mini and start prying up on the front edge.

    • Use the same prying motion to both bend the clips inward and lift the lower housing up out of the top housing.

  4. Mac mini Model A1283 Audio Board Replacement: 手順 4、 2の画像 1 Mac mini Model A1283 Audio Board Replacement: 手順 4、 2の画像 2
    • You may need to move the Jimmy along the edge to pry up all of the clips. Be patient and do a little bit at a time.

  5. Mac mini Model A1283 Audio Board Replacement: 手順 5、 2の画像 1 Mac mini Model A1283 Audio Board Replacement: 手順 5、 2の画像 2
    • Keep working around the perimeter, freeing the clips along the final edge.

  6. Mac mini Model A1283 Audio Board Replacement: 手順 6、 2の画像 1 Mac mini Model A1283 Audio Board Replacement: 手順 6、 2の画像 2
    • Flip the Mac mini back over and lift the top housing off of the lower housing.

  7. Mac mini Model A1283 Audio Board Replacement, Audio Board: 手順 7、 1の画像 1
    • Remove the single Phillips screw between the headphone and microphone jacks on the audio board.

  8. Mac mini Model A1283 Audio Board Replacement: 手順 8、 1の画像 1
    • Use the flat end of a spudger to pry the audio ribbon cable connector off the interconnect board.

  9. Mac mini Model A1283 Audio Board Replacement: 手順 9、 2の画像 1 Mac mini Model A1283 Audio Board Replacement: 手順 9、 2の画像 2
    • Use the tip of a spudger to depress the audio board retaining clip (shown in red) to release the audio board from the bottom housing.

    • Lift the audio board from its free end and remove it from the mini.

    • Don't forget to transfer the audio ribbon cable to your new audio board.

終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Walter Galan

694,044 ポイント

1,203のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 8

今までの合計 17,225