はじめに

Use this guide to replace the SSD in your Mac Pro.

Slide the lock switch to the right, to the unlocked position. Slide the lock switch to the right, to the unlocked position.
  • Slide the lock switch to the right, to the unlocked position.

コメントを追加する

Lift the outer case straight up off the Mac Pro. It may help to push down on the center of the fan while lifting the case up. It may help to push down on the center of the fan while lifting the case up.
  • Lift the outer case straight up off the Mac Pro.

  • It may help to push down on the center of the fan while lifting the case up.

コメントを追加する

Remove the single 6.5 mm T8 Torx screw.
  • Remove the single 6.5 mm T8 Torx screw.

コメントを追加する

Pull the SSD slightly away from the graphics card. Do not pull the top edge of the SSD more than 1/2" away from the graphics card, or you will risk damaging it. Lift the SSD straight up out of its slot on the graphics card.
  • Pull the SSD slightly away from the graphics card.

  • Do not pull the top edge of the SSD more than 1/2" away from the graphics card, or you will risk damaging it.

  • Lift the SSD straight up out of its slot on the graphics card.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

20 の人々がこのガイドを完成させました。

Andrew Optimus Goldberg

メンバー登録日: 2009年10月17日

375,809 ポイント

1,296のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

113 メンバー

5,999のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 16

過去 7 日: 99

過去 30 日: 364

今までの合計 27,065