メインコンテンツにスキップ

M3t Kiosk Preventative maintenance

必要な工具と部品

  1. M3t Kiosk  Preventative maintenance, Handle and Lock: 手順 1、 1の画像 1
    • Make sure the door lock and handle are in good working order and not bent or loose

  2. M3t Kiosk  Preventative maintenance, Opt cords: 手順 2、 2の画像 1 M3t Kiosk  Preventative maintenance, Opt cords: 手順 2、 2の画像 2
    • Check the opt cords to make sure they aren’t broken or crimped

  3. M3t Kiosk  Preventative maintenance, Opt Lights: 手順 3、 1の画像 1
    • Make sure all the opt box lights that are supposed to be on are on.

  4. M3t Kiosk  Preventative maintenance, Dispenser Belts: 手順 4、 2の画像 1 M3t Kiosk  Preventative maintenance, Dispenser Belts: 手順 4、 2の画像 2
    • Clean belts on top and on the back of the dispenser.

  5. M3t Kiosk  Preventative maintenance, Test Dispense: 手順 5、 3の画像 1 M3t Kiosk  Preventative maintenance, Test Dispense: 手順 5、 3の画像 2 M3t Kiosk  Preventative maintenance, Test Dispense: 手順 5、 3の画像 3
    • Test dispense the coin hoppers and the cash dispenser

  6. M3t Kiosk  Preventative maintenance, Test Dispense (continued): 手順 6、 2の画像 1 M3t Kiosk  Preventative maintenance, Test Dispense (continued): 手順 6、 2の画像 2
    • (Continued)

  7. M3t Kiosk  Preventative maintenance: 手順 7、 1の画像 1
    • Check the coin hoppers to make sure nothing is in it other than coins (like rubber bands or something that was dropped in it)

  8. M3t Kiosk  Preventative maintenance, Fans: 手順 8、 2の画像 1 M3t Kiosk  Preventative maintenance, Fans: 手順 8、 2の画像 2
    • Clean any dust off of the fans

  9. M3t Kiosk  Preventative maintenance, Printer: 手順 9、 1の画像 1
    • Check the printer for paper and put in more if it's needed

  10. M3t Kiosk  Preventative maintenance: 手順 10、 2の画像 1 M3t Kiosk  Preventative maintenance: 手順 10、 2の画像 2
    • Open and blow out the printer to remove any loose paper

  11. M3t Kiosk  Preventative maintenance, Clean Bill Validator: 手順 11、 1の画像 1
    • Run a cleaning strip through the BV

  12. M3t Kiosk  Preventative maintenance, Bill Validator board: 手順 12、 1の画像 1
    • Check for coins on the BV board.

  13. M3t Kiosk  Preventative maintenance, Bill Validator protector: 手順 13、 1の画像 1
    • Put a board protector on if it’s missing and you have one available

  14. M3t Kiosk  Preventative maintenance, Screen cleaning: 手順 14、 1の画像 1
    • Clean the touch screen

  15. M3t Kiosk  Preventative maintenance, Door lights: 手順 15、 1の画像 1
    • Check to see if the door lights are on and working

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Timothy Morse

メンバー登録日: 12/30/15

1,198 ポイント

6のガイドは作成済み

チーム

The Curo Group The Curo Group人のメンバー

Community

2 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 257