メインコンテンツにスキップ

はじめに

Add or remove links in order to replace broken links or resize the watch band.

パーツ

パーツは指定されていません。

  1. Measure the watch band to decide how many links to remove.
    • Measure the watch band to decide how many links to remove.

    • It is better to remove an even number of links to keep the clasp centered and symmetrical.

  2. Separate the clasp by pushing in the spring pin. Separate the clasp by pushing in the spring pin.
    • Separate the clasp by pushing in the spring pin.

  3. Remove the clasp from the lug by pushing in on the spring  pin. Remove the clasp from the lug by pushing in on the spring  pin.
    • Remove the clasp from the lug by pushing in on the spring pin.

  4. To remove the first link and lug, push in on the link pin to raise it up. Grasp the link pin and pull it out from the link.
    • To remove the first link and lug, push in on the link pin to raise it up.

    • Grasp the link pin and pull it out from the link.

  5. Push in on the second link pin. Grasp the link pin and pull it up and out.
    • Push in on the second link pin.

    • Grasp the link pin and pull it up and out.

  6. Pull the link apart to remove it from the band.
    • Pull the link apart to remove it from the band.

終わりに

To reassemble your device, follow these instructions in reverse order.

Jacob Posey

メンバー登録日: 2017年02月28日

121 ポイント

1ガイドが承認済み

チーム

University of Memphis, Team S4-G8, Baddour Spring 2017 University of Memphis, Team S4-G8, Baddour Spring 2017人のメンバー

UM-BADDOUR-S17S4G8

3 メンバー

1のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 433