メインコンテンツにスキップ

Logitech UE MegaBoom Battery Replacement

必要な工具と部品

  1. Logitech UE MegaBoom Battery Replacement, Outer Mesh: 手順 1、 3の画像 1 Logitech UE MegaBoom Battery Replacement, Outer Mesh: 手順 1、 3の画像 2 Logitech UE MegaBoom Battery Replacement, Outer Mesh: 手順 1、 3の画像 3
    • Locate the ends of the speaker.

    • Put a plastic opening tool in-between the rubber end and the mesh.

    • Apply a upward force in order to pry open the end.

    • Apply this procedure to the other side as well.

    • Will take force.

    • Using metal tools may permanently mar your device.

  2. Logitech UE MegaBoom Battery Replacement: 手順 2、 3の画像 1 Logitech UE MegaBoom Battery Replacement: 手順 2、 3の画像 2 Logitech UE MegaBoom Battery Replacement: 手順 2、 3の画像 3
    • Take the Jimmy and pry up the rubber strip that has the volume buttons on it.

    • You will hear clicks as it pries up, don't worry.

    • Remove all the rubber you pried off.

  3. Logitech UE MegaBoom Battery Replacement: 手順 3、 2の画像 1 Logitech UE MegaBoom Battery Replacement: 手順 3、 2の画像 2
    • Use tweezers to lift end of plastic retainer on edge of mesh out of its channel.

    • Work the plastic retainer out of the channel all the way around the speaker.

    • Be gentle, it is easy to damage the fabric.

    • Repeat for other side.

  4. Logitech UE MegaBoom Battery Replacement, Battery: 手順 4、 1の画像 1
    • Pull on white strip to remove battery.

    • Remove inner plastic gasket on circuit board.

    • Remove 2nd plastic gasket around outer circuit board edge, under rubber gasket.

    • Gently pry circuit board up out of recess.

終わりに

To reassemble your device, follow these instructions in reverse order.

14 の人々がこのガイドを完成させました。

作成者

6人の作成者と共同で作成されました。

Oscar Ambriz

メンバー登録日: 09/27/17

958 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team S9-G2, Banghart Fall 2017 Cal Poly, Team S9-G2, Banghart Fall 2017人のメンバー

CPSU-BANGHART-F17S9G2

4 メンバー

14のガイドは作成済み

23 件のコメント

There is a way to take it apart without all these steps and a complete tear down.

Brian Longhurst - 返信

How to ensure it’s waterproof upon reassembly?

mdeblasi - 返信

This is huge overkill. Only the bottom cap and circuit board need to be removed for a battery replacement.

coryjohnson011 - 返信

I agree. The battery is located on the bottom end only.

Jamin Hu -

^ the person who says that you only need to remove the one end-cap to replace the battery is correct. The process outlined in this article is more likely to damage all the fabric and other end-cap than just opening one end and gently prying it back until you can slide out the battery. FYI, the pull tab on my battery broke right off, and I had to pull it out with pliers.

sizz0p - 返信

コメントを追加

統計データ:

過去 24時間: 25

過去 7 日: 189

過去 30 日: 822

今までの合計 47,517