Logitech Harmony Companion Remote Motherboard Replacement

はじめに

The motherboard is a central part in the operation of your Companion remote. If your remote is not working after adjusting the settings and replacing the battery, you may need to replace the motherboard. All you need for this guide is a plastic opening tool and a Phillps #0 screwdriver.

必要な工具と部品

手順1 Remote Battery

Logitech Harmony Companion Remote Motherboard Replacement, Remote Battery: 手順 1、 1の画像 1

Hold the remote with the Logitech label toward you.

編集

手順2

Push the battery cover upward.

編集

手順3

Logitech Harmony Companion Remote Motherboard Replacement: 手順 3、 3の画像 3

Use your finger to lift the battery out of the compartment.
When the battery has lifted, push it up to remove it.

編集

手順4 Remote Motherboard

Logitech Harmony Companion Remote Motherboard Replacement, Remote Motherboard: 手順 4、 2の画像 1

Logitech Harmony Companion Remote Motherboard Replacement, Remote Motherboard: 手順 4、 2の画像 2

Remove the two 5.0 mm Phillips #0 screws.

編集

手順5

Use the plastic opening tool to pry open the back cover of the remote.
It is recommended to have the point of the opening tool facing the back of the remote.
Insert the opening tool on each side of the bottom of the remote, and pull up until you hear the cover click open.
Pry the back cover off by sliding the plastic opening tool down each side.