メインコンテンツにスキップ

Lite-On iHAS324 Chassis Replacement

必要な工具と部品

  1. Lite-On iHAS324 Chassis Replacement, Chassis: 手順 1、 2の画像 1 Lite-On iHAS324 Chassis Replacement, Chassis: 手順 1、 2の画像 2
    • Insert a paper clip into a small hole on the right side of the faceplate bellow the disc tray.

    • There may be resistance, do not be afraid to use force.

    • The tray should then pop open.

    • Pull out the tray so that it is fully extended.

  2. Lite-On iHAS324 Chassis Replacement: 手順 2、 3の画像 1 Lite-On iHAS324 Chassis Replacement: 手順 2、 3の画像 2 Lite-On iHAS324 Chassis Replacement: 手順 2、 3の画像 3
    • Use a plastic opening tool to push the three tabs located on the right, left, and bottom side of the outer chassis to loosen the faceplate off.

  3. Lite-On iHAS324 Chassis Replacement: 手順 3、 1の画像 1
    • Pull the faceplate off the chassis.

    • Do NOT pull the faceplate all the way off the disc tray, because doing so can cause damage to the faceplate.

    • There may be resistance, do not be afraid to use force.

  4. Lite-On iHAS324 Chassis Replacement: 手順 4、 1の画像 1
    • Using the Phillips Head #2 screwdriver, unscrew the two 8.5 mm screws located on the bottom back of the chassis.

  5. Lite-On iHAS324 Chassis Replacement: 手順 5、 1の画像 1
    • Remove the bottom plate by lifting it off the device.

  6. Lite-On iHAS324 Chassis Replacement: 手順 6、 1の画像 1
    • Turn the device over.

    • Remove the top plate by pulling the sides and lifting the plate off.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Kayla Culpepper

メンバー登録日: 03/22/15

675 ポイント

5のガイドは作成済み

チーム

Baylor, Team 5-9, Williams Spring 2015 Baylor, Team 5-9, Williams Spring 2015人のメンバー

BU-WILLIAMS-S15S5G9

3 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 10

今までの合計 1,272