Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal - iFixit 修理ガイド

はじめに

If you just can't find out what is wrong with your disco ball, you will probably need to open it to troubleshoot it. This guide will walk you through the steps to do that.

必要な工具と部品

手順1 Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal

Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal, Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: 手順 1、 1の画像 1

Turn the device over so that the base is on top.

手順2

Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: 手順 2、 1の画像 1

Peel off the piece of metal that is glued to hold the two halves of the base together.
You may need rubber cement to reapply the piece of metal when reassembling the device.

手順3

Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: 手順 3、 2の画像 1

Lite FX Rotating Big Ball of Lite Model 1929 Back Panel Removal: 手順 3、 2の画像 2

Unscrew the four 10mm Phillips head screws on the bottom of the device.
Once the base is removed, the device should look as shown on the picture.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

8人の作成者と共同で作成されました。

Nick Kaprielian

メンバー登録日: 01/14/14

525 ポイント

4のガイドは作成済み

+9 個以上のバッジ

チーム

Cal Poly, Team 17-3, Forte Winter 2014 Cal Poly, Team 17-3, Forte Winter 2014人のメンバー

CPSU-FORTE-W14S17G3

5 メンバー

7のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 549