メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

  1. Remove the two 3mm screws on the back of the device with the Phillips Screwdriver #00 bit. Remove the 2mm screw on the back fo the device with a Phillips #00 bit.
    • Remove the two 3mm screws on the back of the device with the Phillips Screwdriver #00 bit.

    • Remove the 2mm screw on the back fo the device with a Phillips #00 bit.

    • Using the blue opening tools or spudger, gently remove the back cover to expose the interior of the tablet.

  2. iPhone LCDスクリーン修理キット

    生涯保証付きの低コストオプション

    キット商品を見る

    iPhone LCDスクリーン修理キット

    品質ではなく、修理コストを削減しましょう。

    キット商品を見る
  3. Remove the six 3mm screws on the back of the motherboard with the Phillips Screwdriver #00 bit. Remove the ribbon cables connecting the boards to the other electrical components
    • Remove the six 3mm screws on the back of the motherboard with the Phillips Screwdriver #00 bit.

    • Remove the ribbon cables connecting the boards to the other electrical components

    • Remove ZIF connectors connecting the boards to the electrical components.

    • Some of the ribbon cables are secured with clips, simply pry up the clips before sliding them out of the pin connectors.

  4. Replace the motherboard with the new motherboard. Be careful not to damage the ribbon cables when reassembling the device.
    • Replace the motherboard with the new motherboard.

    • Be careful not to damage the ribbon cables when reassembling the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

Charles Rhode

メンバー登録日: 2017年09月28日

495 ポイント

3のガイドは作成済み

チーム

USF Tampa, Team S2-G4, Nance Fall 2017 USF Tampa, Team S2-G4, Nance Fall 2017人のメンバー

USFT-NANCE-F17S2G4

3 メンバー

12のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 3

過去 7 日: 8

過去 30 日: 22

今までの合計 1,169