メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

Is your laptop audio not performing like it used to? Your speakers may be old and in need of replacement. This guide will show you how to do just that.

  1. Remove the eleven 6mm T5 Torx screws from the back case.
    • Remove the eleven 6mm T5 Torx screws from the back case.

  2. Insert the plastic opening tool into the long side of the case backing and slide it the entire length of the laptop. Gently lift the backing off the laptop. Gently lift the backing off the laptop.
    • Insert the plastic opening tool into the long side of the case backing and slide it the entire length of the laptop.

    • Gently lift the backing off the laptop.

  3. Remove the four 3mm PH#0 screws surrounding the battery.
    • Remove the four 3mm PH#0 screws surrounding the battery.

  4. Manta Driver Kit

    どんな修理にでも対応可能な112ビット

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  5. Gently lift the battery and use the plastic opening tool to remove the battery's connection to the laptop. Gently lift the battery and use the plastic opening tool to remove the battery's connection to the laptop. Gently lift the battery and use the plastic opening tool to remove the battery's connection to the laptop.
    • Gently lift the battery and use the plastic opening tool to remove the battery's connection to the laptop.

  6. Using a pair of tweezers, dissconnect the speakers on the left side of the laptop.
    • Using a pair of tweezers, dissconnect the speakers on the left side of the laptop.

  7. Flip up the black retaining flap on the ZIF connector. Using tweezers, gently disconnect the blue strip that connects the touch pad to the motherboard.
    • Flip up the black retaining flap on the ZIF connector.

    • Using tweezers, gently disconnect the blue strip that connects the touch pad to the motherboard.

  8. Use tweezers to gently pull off tape that is holding down wires that are connecting the two speakers together. Use tweezers to gently pull off tape that is holding down wires that are connecting the two speakers together.
    • Use tweezers to gently pull off tape that is holding down wires that are connecting the two speakers together.

  9. Both speakers are held in place by plastic pegs. Gently lift the speakers off the casing to remove them. Both speakers are held in place by plastic pegs. Gently lift the speakers off the casing to remove them.
    • Both speakers are held in place by plastic pegs. Gently lift the speakers off the casing to remove them.

  10. Simply grip the speaker wires and lift away from laptop to remove. Simply grip the speaker wires and lift away from laptop to remove.
    • Simply grip the speaker wires and lift away from laptop to remove.

終わりに

To reassemble your device, follow these instructions in reverse order.

Matthew Victores

メンバー登録日: 2016年09月28日

571 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team 3-2, Passmore Fall 2016 USF Tampa, Team 3-2, Passmore Fall 2016人のメンバー

USFT-PASSMORE-F16S3G2

4 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 7

今までの合計 953