メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Follow this guide to successfully replace the ribbon cable and camera for the Lenovo ThinkPad Tablet 1838.

パーツ

パーツは指定されていません。

  1. To access the camera,  remove the button covers by prying them off.
    • To access the camera, remove the button covers by prying them off.

  2. After removing the buttons, remove the two screws marked.
    • After removing the buttons, remove the two screws marked.

  3. Carefully pry off the outer perimeter of the tablet using a plastic opening tool.
    • Carefully pry off the outer perimeter of the tablet using a plastic opening tool.

  4. Lift the tab located on the back and slide it out to remove the ribbon cable. Only the back side of the cable has been removed—the other can remain connected.
    • Lift the tab located on the back and slide it out to remove the ribbon cable.

    • Only the back side of the cable has been removed—the other can remain connected.

  5. Remove the marked screw and lift out the entire camera assembly. Remove the marked screw and lift out the entire camera assembly. Remove the marked screw and lift out the entire camera assembly.
    • Remove the marked screw and lift out the entire camera assembly.

終わりに

To reassemble your device, follow these instructions in reverse order.

Juan Rojo

メンバー登録日: 2018年09月21日

174 ポイント

1ガイドが承認済み

チーム

University of North Texas, Team S1-G2, Riccardelli Fall 2018 University of North Texas, Team S1-G2, Riccardelli Fall 2018人のメンバー

UNT-RICCARDELLI-F18S1G2

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 101