メインコンテンツにスキップ

はじめに

If you are encountering issues with your keyboard, there is a possibility that you might have to replace it. You can utilize this guide to receive step by step instruction to complete this task manually by yourself.

パーツ

パーツは指定されていません。

  1. Remove the battery by pulling on the two sliding buttons next to the battery.
    • Remove the battery by pulling on the two sliding buttons next to the battery.

  2. Remove the seven 5mm screws on the back cover using the Phillips #0 screwdriver. Remove the seven 5mm screws on the back cover using the Phillips #0 screwdriver.
    • Remove the seven 5mm screws on the back cover using the Phillips #0 screwdriver.

  3. Remove the two rubber stoppers from  where the battery previously was.
    • Remove the two rubber stoppers from where the battery previously was.

  4. Flip the laptop, shift the keyboard upwards by applying force to the two indents on the keyboard. Remove the six 5mm screws that are on the keyboard using the Phillips #0 screwdriver.
    • Flip the laptop, shift the keyboard upwards by applying force to the two indents on the keyboard.

    • Remove the six 5mm screws that are on the keyboard using the Phillips #0 screwdriver.

    • These screws are located above the left ctrl key, S, F, J, semicolon, and up arrow keys.

  5. Lift the keyboard and flip over exposing the connection to the motherboard.
    • Lift the keyboard and flip over exposing the connection to the motherboard.

  6. Remove the plastic covering and detach touch point and keyboard cable.
    • Remove the plastic covering and detach touch point and keyboard cable.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Nathan Morgan

メンバー登録日: 2019年11月11日

403 ポイント

2のガイドは作成済み

チーム

IUPUI, Team S2-G5, Stella Fall 2019 IUPUI, Team S2-G5, Stella Fall 2019人のメンバー

IUPUI-STELLA-F19S2G5

3 メンバー

2のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 7

過去 7 日: 32

過去 30 日: 111

今までの合計 1,853