メインコンテンツにスキップ

はじめに

If the motherboard for your Lenovo Thinkpad Yoga 260 (Model Number: 20FD002HUS) is defective or broken, this guide will carefully walk you through the steps to replace it.

If your computer is often failing to boot or you are experiencing random freezing issues and “blue screens of death” you may consider replacing the motherboard.

Before using this guide ensure the laptop is powered off, disconnected from external power sources, and you have the listed tools available for use.

  1. Ensure the device is off and unplugged.
    • Ensure the device is off and unplugged.

    • Remove the stylus from its port and set aside.

  2. Using a Phillips #1  screwdriver, gently unscrew the eight 1.3 mm Phillips #1 screws until you hear an audible click. The screws will not separate from the bottom cover when loose.
    • Using a Phillips #1 screwdriver, gently unscrew the eight 1.3 mm Phillips #1 screws until you hear an audible click.

    • The screws will not separate from the bottom cover when loose.

  3. The bottom cover is attached via several plastic clips located around the edges of the bottom cover. Using a plastic opening tool, gently pry the bottom cover from the laptop.
    • The bottom cover is attached via several plastic clips located around the edges of the bottom cover.

    • Using a plastic opening tool, gently pry the bottom cover from the laptop.

    • Work the plastic opening tool around the edges of the bottom cover undoing all of the plastic clips, as shown in the picture.

  4. Place your fingers around the edges of the cover and remove it. Place your fingers around the edges of the cover and remove it.
    • Place your fingers around the edges of the cover and remove it.

  5. Fold back the plastic cover to access the battery connection. Remove the battery connection using your two index fingers. Gently separate the connectors.
    • Fold back the plastic cover to access the battery connection.

    • Remove the battery connection using your two index fingers.

    • Gently separate the connectors.

  6. Unscrew the two 1.3 mm Phillips #1 fasteners using a Phillips #1 screwdriver and set them aside. Lift the battery free from its mounting and remove it. Lift the battery free from its mounting and remove it.
    • Unscrew the two 1.3 mm Phillips #1 fasteners using a Phillips #1 screwdriver and set them aside.

    • Lift the battery free from its mounting and remove it.

  7. Using both thumbs, pinch the RAM's  mounting clips outward. The RAM module will spring up on its own.
    • Using both thumbs, pinch the RAM's mounting clips outward.

    • The RAM module will spring up on its own.

  8. Gently remove it from its mounting.
    • Gently remove it from its mounting.

  9. Heatsink should be cool to the touch. Using your index fingers, gently remove the fan’s power connection.
    • Heatsink should be cool to the touch.

    • Using your index fingers, gently remove the fan’s power connection.

  10. Using a Phillips #1 screwdriver, remove the four 1.3 mm Phillips #1 screws and set them aside. The screws will not separate from the mounting when loose.
    • Using a Phillips #1 screwdriver, remove the four 1.3 mm Phillips #1 screws and set them aside.

    • The screws will not separate from the mounting when loose.

  11. Using your index finger and thumb, gently pry the cooler from its mountings and remove the assembly.
    • Using your index finger and thumb, gently pry the cooler from its mountings and remove the assembly.

  12. Using a Phillips #1 screwdriver, remove the 1.3 mm screw and set it aside. Using a Phillips #1 screwdriver, remove the 1.3 mm screw and set it aside. Using a Phillips #1 screwdriver, remove the 1.3 mm screw and set it aside.
    • Using a Phillips #1 screwdriver, remove the 1.3 mm screw and set it aside.

  13. Carefully pull out the Wi-Fi card. Be sure to pull laterally, not upwards.
    • Carefully pull out the Wi-Fi card.

    • Be sure to pull laterally, not upwards.

  14. Carefully disconnect the 2 cables from the WiFi-Card as indicated on the card label. Set the Wifi-Card aside.
    • Carefully disconnect the 2 cables from the WiFi-Card as indicated on the card label.

    • Set the Wifi-Card aside.

  15. Disconnect the speaker cable located near hinge side of the laptop. Remove both speakers from the assembly.
    • Disconnect the speaker cable located near hinge side of the laptop.

    • Remove both speakers from the assembly.

  16. Gently lift up the SD chip's black protective film. Using a Phillips #1 screwdriver, remove the 1.3 mm screw and set it aside. Unplug the SD chip from the assembly and set the SD chip aside.
    • Gently lift up the SD chip's black protective film.

    • Using a Phillips #1 screwdriver, remove the 1.3 mm screw and set it aside.

    • Unplug the SD chip from the assembly and set the SD chip aside.

  17. Pull up on the 2 black tabs to remove the cords located along the hinge edge of the device. Pull up on the 2 black tabs to remove the cords located along the hinge edge of the device. Pull up on the 2 black tabs to remove the cords located along the hinge edge of the device.
    • Pull up on the 2 black tabs to remove the cords located along the hinge edge of the device.

  18. Pull up the 6 colored tabs along the edge of the motherboard to disconnect them from the motherboard. Pull up the 6 colored tabs along the edge of the motherboard to disconnect them from the motherboard. Pull up the 6 colored tabs along the edge of the motherboard to disconnect them from the motherboard.
    • Pull up the 6 colored tabs along the edge of the motherboard to disconnect them from the motherboard.

  19. Remove the fourteen .8 mm screws on the motherboard using a Phillips #00 screwdriver.
    • Remove the fourteen .8 mm screws on the motherboard using a Phillips #00 screwdriver.

    • Carefully lift the motherboard out of assembly.

    • Ensure no wires or cables remain connected.

終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

Ian Jenkins

メンバー登録日: 2020年02月18日

226 ポイント

1ガイドが承認済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 34

今までの合計 551