Skip to main content

ガイド紹介

This is a very simple replacement that acts as a prerequisite for hard drive replacement. It involves just the use of a Phillips #0 screwdriver and small plastic opening tool.

パーツ

パーツは指定されていません。

  1. Flip the laptop upside down so that the battery is facing away from you.
    • Flip the laptop upside down so that the battery is facing away from you.

    • Battery removal is not necessary to complete this guide.

  2. Android 修理キット

    交換用スクリーンやバッテリーの修理キット

    ショップを見る

    Android 修理キット

    交換用スクリーンやバッテリーの修理キット

    ショップを見る
  3. Locate the three 3 mm Phillips #0 screws on the back panel. Remove each screw using a small Phillips #0 screwdriver.
    • Locate the three 3 mm Phillips #0 screws on the back panel.

    • Remove each screw using a small Phillips #0 screwdriver.

  4. Using a small plastic opening tool, pry off the back casing starting at a point closest to you and working around the perimeter of the case.
    • Using a small plastic opening tool, pry off the back casing starting at a point closest to you and working around the perimeter of the case.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Kenneth nguyen

メンバー登録日: 2016年10月06日

199 Reputation

1ガイドが承認済み

チーム

Cal Poly, Team 20-5, Livingston Fall 2016 Cal Poly, Team 20-5, Livingston Fall 2016人のメンバー

CPSU-LIVINGSTON-F16S20G5

4 メンバー

5のガイドは作成済み

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 220