修理を始めるには コミュニティ ストア

Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement

作成者： Michael Megna (そして 4 人のその他投稿者)
  • コメント: 2
  • お気に入り: 0
  • 完了: 4

難易度

難しい

手順

15

所要時間

20分 - 1時間

セクション

3

フラグ

1

Inconsistent Images

一貫性のない画像

このガイドの画像を必要条件ガイドとより一致するように変更するとさらに素晴らしくなります。

はじめに

In this guide, you will learn how to replace the motherboard in a Lenovo ThinkPad X1 Carbon 6th Gen. Be sure to power off your device and disconnect it from any power source before beginning.

必要なもの

  1. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement, Back Cover: 手順 1、 2の画像 1 Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement, Back Cover: 手順 1、 2の画像 2

    • Use a Phillips #0 screwdriver to unscrew the five screws that secure the back cover to the laptop.

    • The screws do not completely come off from the back cover. Loosen until the screws are completely loose.

    編集

  2. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 2、 2の画像 1 Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 2、 2の画像 2

    • Use a Jimmy to lift the cover directly up off of the locating pins.

    • Though a metal opening tool is shown in the image, we recommend using plastic opening tools to minimize any cosmetic damage.

    • Remove the back cover.

    • If you encounter resistance when lifting the cover, revisit the screws to see if any of them are still threaded on to the device.

    編集

  3. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement, Fan: 手順 3、 2の画像 1 Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement, Fan: 手順 3、 2の画像 2

    • Use a Phillips #0 screwdriver to loosen the four screws that secure the fan to the motherboard.

    • The screws do not completely come off from the fan mount. Loosen until the screws are completely loose.

    編集

  4. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 4、 2の画像 1 Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 4、 2の画像 2

    • Use nylon tipped tweezers, or your fingers, to gently pull the fan's power cable towards the SSD, disconnecting it from the pins.

    • Be sure to pull on all of the cables at the same time.

    編集

  5. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 5、 2の画像 1 Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 5、 2の画像 2

    • Use a plastic opening pick to lift the fan mount.

    • Use your fingers to gently pull the fan diagonally away from where it is connected.

    編集

  7. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 6、 1の画像 1

    • Turn the fan over to expose the interior.

    • If necessary, clean out the fan or wipe away and replace the thermal paste.

    編集

  8. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement, Motherboard: 手順 7、 3の画像 1 Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement, Motherboard: 手順 7、 3の画像 2 Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement, Motherboard: 手順 7、 3の画像 3

    • Remove each of the 7 main ribbon cables that connect the motherboard to the rest of the laptop.

    • Detach the last ribbon cable in the same way as before.

    • These connectors and cables and are all very fragile. Handle with care.

    • For the red and orange cables, use a spudger to lift the black plastic bar.

    • The bar should be lifted to the point where it can move easily.

    編集

  9. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 8、 2の画像 1 Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 8、 2の画像 2

    • Place a spudger under the cables to disconnect them from the WAN card.

    • Tweezers or a hook may also be used for this step.

    編集

  10. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 9、 2の画像 1 Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 9、 2の画像 2

    • Use a Phillips #00 screwdriver to remove the two 3mm screws that secure the IO bracket.

    編集

  11. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 10、 2の画像 1 Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 10、 2の画像 2

    • The antenna brackets act as a securing mount for the motherboard to the device.

    • Remove the two 3mm antenna bracket screws using a Phillips #00 screwdriver.

    編集

  12. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 11、 1の画像 1

    • Lift from the location of the screw towards you. Then pull towards the screw side to remove the bracket.

    編集

  13. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 12、 1の画像 1

    • The housing for the SD card slot is directly attached to the device.

    • Remove and unscrew the two 5mm screws with a Phillips #0 screwdriver..

    編集

  14. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 13、 2の画像 1 Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 13、 2の画像 2

    • Using an iFixit SIM card screw head tip, apply pressure to the hole to disconnect the SD card slot from the device.

    編集

  15. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 14、 1の画像 1

    • Use a Phillips #00 screwdriver to remove each of the four remaining 3mm screws securing the motherboard to the device.

    編集

  16. Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 15、 2の画像 1 Lenovo ThinkPad X1 Carbon 6th Gen Motherboard Replacement: 手順 15、 2の画像 2

    • Lift from the top of the motherboard towards you.

    • Pull away from the IO port side to remove the motherboard.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

作成者

4他の投稿者と一緒に

Michael Megna

メンバー登録日: 2020年01月23日

1,135 ポイント

7のガイドは作成済み

バッジ: 13

+10 個以上のバッジ

チーム

Cal Poly, Team S19-G4, White Winter 2020 Cal Poly, Team S19-G4, White Winter 2020人のメンバー

CPSU-WHITE-W20S19G4

3 メンバー

20のガイドは作成済み

コメント 1 件

Step 3 should be removing the battery. There are 4 screws to do this.

Jesse Corbel - 返信

コメントを追加

統計データを表示:

過去 24時間: 6

過去 7 日: 55

過去 30 日: 262

今までの合計 4,671