はじめに

Detailed steps to dissasemble to the logic board, then usefull pictures for rest of guide. (remember to add new thermal compound if you need to remove/replace fan assembly on processor and GPU)

パーツ

パーツは必要ありません。

recommend to print out picture of the backside of the laptop and then use it as a template to place the screws on. They are many and different sizes.
  • recommend to print out picture of the backside of the laptop and then use it as a template to place the screws on. They are many and different sizes.

  • Remove all bottom screws and place on template printout.

コメントを追加する

remove CD drive , then hard drive. remove CD drive , then hard drive.
  • remove CD drive , then hard drive.

コメントを追加する

unsnap touchpad left and right. lift up touchpad carefully, and disconnect touchpad. lift up touchpad carefully, and disconnect touchpad.
  • unsnap touchpad left and right.

  • lift up touchpad carefully, and disconnect touchpad.

コメントを追加する

Pull keyboard gently toward yourself. and then lift up untill flex is visible. use spudger to disconnect connector for keyboard.
  • Pull keyboard gently toward yourself. and then lift up untill flex is visible.

  • use spudger to disconnect connector for keyboard.

コメントを追加する

The rest of the guide is mosly helpfull pictures...
  • The rest of the guide is mosly helpfull pictures...

  • Remove WLAN module by

    • unplug carefully with spudger the two RF connectors to WLAN module.

    • removw two screws holding wlan module.

    • lift up module 45 degress and pull outwards.

コメントを追加する

usefull images showing most of main assembly. Removing RAM modules is usefull if the whole logic board needs to be taken out. From here on , unscrew everything - carefully note where screws belong. I used Ifixit magnetic mat and some note making.
  • usefull images showing most of main assembly.

  • Removing RAM modules is usefull if the whole logic board needs to be taken out.

  • From here on , unscrew everything - carefully note where screws belong. I used Ifixit magnetic mat and some note making.

Careful with the screw under the flexprint of the screen

Juan Reyes - 返信

one more image to help you
  • one more image to help you

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

Carsten Dahl Hjarup

メンバー登録日: 2013年11月04日

748 ポイント

2のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 3

過去 7 日: 28

過去 30 日: 95

今までの合計 7,909