Lenovo Ideatab A1107 Front Camera Replacement

はじめに

The Lenovo Ideatab A1107 Front Camera Replacement guide will show users how to safely remove the front camera component from the Lenovo Ideatab A1107. Included in the guide are the proper tools needed to complete the replacement, as well as photos with mark-ups.

必要な工具と部品

手順1 Back Cover

Lenovo Ideatab A1107 Front Camera Replacement, Back Cover: 手順 1、 2の画像 1

Lenovo Ideatab A1107 Front Camera Replacement, Back Cover: 手順 1、 2の画像 2

Insert a plastic opener in-between the black back panel and the silver body of the tablet.
Use the plastic opener to pry the back panel off by moving the plastic opener around the outside edge of the device.

編集

手順2

Use a Phillips #000 screwdriver to remove the seventeen 4mm screws.

編集

手順3

Lift up and remove the interior casing to expose the inner components.
Do not be alarmed if the volume button and lock button fall off when removing the interior casing.

編集

手順4 Battery

Lenovo Ideatab A1107 Front Camera Replacement, Battery: 手順 4、 1の画像 1

Use tweezers to remove the tape covering the battery's wiring.

編集

手順5

Do not puncture the lithium-ion battery. Ruptured batteries can catch fire or explode.
Do not use metal tools to remove the battery wire. They present the risk of electrocution.
Use a plastic spudger tool to push the battery's wire harness and disconnect it from the device.

編集

手順6

Do not puncture the lithium-ion battery. Ruptured batteries can catch fire or explode.
Wedge a plastic opening tool in between the battery and the internal components of the device.
Use the plastic opener tool to remove the battery from its casing.

編集

手順7 Screen

Lenovo Ideatab A1107 Front Camera Replacement, Screen: 手順 7、 1の画像 1

Using you hands, lift off the digitizer.

編集

手順8

Remove the three screws that are 2.0 mm in length and have a 5.25 mm head width with a Phillips #00 screwdriver.

編集

手順9

Use a spudger to remove the plastic piece securing the zero insertion force (ZIF) cable connector.
Use tweezers to grasp the ribbon cable, then pull the cable to disconnect it from the device.

編集

手順10

Locate the black electrical tape strip on the side of the device.
Gently remove the tape from the device using the tweezers.

編集

手順11

Lenovo Ideatab A1107 Front Camera Replacement: 手順 11、 3の画像 3

After removing the electric tape, gently lift up the green control panel.
Taking the tweezers, remove the ribbon cable from the control panel.
Once the ribbon cable is removed from the panel, the display should separate with ease.