メインコンテンツにスキップ

Lenovo Ideapad 110S-11IBR Thermal paste Replacement

必要な工具と部品

  1. Lenovo Ideapad 110S-11IBR Thermal paste Replacement, Battery: 手順 1、 1の画像 1
    • Ensure that your device is completely OFF before performing this procedure.

    • Unscrew the eleven 4 mm Phillips #0 screws on the bottom of the device.

  2. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 手順 2、 2の画像 1 Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 手順 2、 2の画像 2
    • Separate the back lid from the laptop using a plastic opening tool.

    • Lift the back lid off of the device.

  3. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 手順 3、 2の画像 1 Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 手順 3、 2の画像 2
    • Remove the battery connector from its socket by pulling the cable away from the hinge using your fingers or a plastic opening tool.

    • Do not pull on the socket itself or you risk damaging the motherboard.

    • Remove the two pieces of tape that are holding the battery down.

  4. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 手順 4、 1の画像 1
    • Remove the five 4 mm Phillips screws securing the battery.

  5. Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 手順 5、 2の画像 1 Lenovo Ideapad 110S-11IBR Thermal paste Replacement: 手順 5、 2の画像 2
    • Lift the battery up and out of the device.

    • once the battery is removed unscrew the coldplate and pull it free from the mainboard.

    • Using Isopropyl alcohol and a microfiber cloth, wipe away the old thermal compound, make sure to clean the coldplate and CPU die.

    • apply about half a gram of non-conductive thermal compound to the heat spreader of the CPU and replace the coldplate pressing down gently.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

[deleted]

メンバー登録日: 08/14/21

355 ポイント

1ガイドが承認済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 172