パーツ

パーツは必要ありません。

  1. Remove the battery.
    • Remove the battery.

  2. Take a JI head screw driver and remove the screws holding the back panel down. There should be 9 screws in total.
    • Take a JI head screw driver and remove the screws holding the back panel down.

    • There should be 9 screws in total.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. It should be easy to lift the panel up and off.
    • It should be easy to lift the panel up and off.

    • If it is difficult then there is most likely a screw still in.

  5. When the panel comes off the back will look like this.
    • When the panel comes off the back will look like this.

    • Outlined in red is where the hard drive will be.

    • Gently lift and remove the hard drive.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Joelyn Hanson

メンバー登録日: 2018年09月21日

159 ポイント

1ガイドが承認済み

チーム

University of North Texas, Team S8-G4, Riccardelli Fall 2018 University of North Texas, Team S8-G4, Riccardelli Fall 2018人のメンバー

UNT-RICCARDELLI-F18S8G4

4 メンバー

3のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 25

今までの合計 94