1. Using the metal spudger, remove all the rubber squares on the bottom of the laptop. Using the metal spudger, remove all the rubber squares on the bottom of the laptop.
    • Using the metal spudger, remove all the rubber squares on the bottom of the laptop.

  2. Remove the three 6 mm Phillips #1 screws  holding the panel on the laptop. Pry the panel from the laptop using your hands or the metal spudger if necessary. Pry the panel from the laptop using your hands or the metal spudger if necessary.
    • Remove the three 6 mm Phillips #1 screws holding the panel on the laptop.

    • Pry the panel from the laptop using your hands or the metal spudger if necessary.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. Make sure your computer is turned off.
    • Make sure your computer is turned off.

    • Lift the back panel away from you.

    • Locate the battery in the bottom right corner.

  5. Remove the three 3mm screws located on the perimeter of the battery using the Phillips #1 screwdriver.
    • Remove the three 3mm screws located on the perimeter of the battery using the Phillips #1 screwdriver.

  6. Locate the small rectangle shaped connector to the left  of your battery. Use your fingers to gently detach the white connector. Use your fingers to gently detach the white connector.
    • Locate the small rectangle shaped connector to the left of your battery.

    • Use your fingers to gently detach the white connector.

まとめ

To reassemble your device, follow these instructions in reverse order.

Alysia Mcafee

メンバー登録日: 2018年09月18日

107 ポイント

1ガイドが承認済み

チーム

University of North Texas, Team S3-G5, Raign Fall 2018 University of North Texas, Team S3-G5, Raign Fall 2018人のメンバー

UNT-RAIGN-F18S3G5

4 メンバー

6のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 11

今までの合計 89