はじめに

The hard disk drive is the data storage device for your computer. If it breaks, you may choose to replace it with either another 2.5" SATA hard drive or an SSD. An SSD does not have any moving parts, is more resistant to shock, has faster read and write speeds, and runs quieter than a hard disk drive. However, SSDs are also more expensive.

パーツ

パーツは必要ありません。

  1. Unscrew the six screws on the back panel of the laptop using a PH1 Phillips bit.
    • Unscrew the six screws on the back panel of the laptop using a PH1 Phillips bit.

    • These screws are attached to the panel. When unscrewing, be sure to stop when you here a click.

    コメントを追加する

  2. Lift the back panel from the side closest to the battery and remove the panel.
    • Lift the back panel from the side closest to the battery and remove the panel.

    コメントを追加する

    • Slide the hard drive to the right, away from the RAM modules.

    • Lift the hard drive from the side closest to the RAM modules.

    • When re-inserting the hard drive, ensure that the copper contacts on the drive's connector are facing upwards.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

James Morizzo

メンバー登録日: 2014年09月29日

472 ポイント

3のガイドは作成済み

チーム

USF Tampa, Team 1-4, Hickman Fall 2014 USF Tampa, Team 1-4, Hickman Fall 2014人のメンバー

USFT-HICKMAN-F14S1G4

3 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 9

今までの合計 1,181