メインコンテンツにスキップ

はじめに

This guide will help the users fix issues with the WiFi/ Bluetooth card that is found in the Lenovo IdeaPad 100S-141BR.

パーツ

パーツは指定されていません。

  1. Remove the eight 4mm PH00 screws.
    • Remove the eight 4mm PH00 screws.

    • Remove the four 2mm PH00 screws.

  2. Use the nylon spudger to loosen the back cover from the back of the device. You may hear a bit of a snapping sound, but this is normal.
    • Use the nylon spudger to loosen the back cover from the back of the device.

    • You may hear a bit of a snapping sound, but this is normal.

  3. For safety reasons, disconnect the wires connecting the battery to the motherboard with the nylon spudger.
    • For safety reasons, disconnect the wires connecting the battery to the motherboard with the nylon spudger.

  4. Remove the tape and unscrew the single 2mm PH00 screw. Pull out the current WiFi/Bluetooth card, unplugging the two wires connected to it.
    • Remove the tape and unscrew the single 2mm PH00 screw.

    • Pull out the current WiFi/Bluetooth card, unplugging the two wires connected to it.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Bin Feng

メンバー登録日: 2019年03月18日

256 ポイント

2のガイドは作成済み

チーム

University of Memphis, Team S1-G3, Kim Spring 2019 University of Memphis, Team S1-G3, Kim Spring 2019人のメンバー

UM-KIM-S19S1G3

3 メンバー

9のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 8

過去 30 日: 41

今までの合計 916