メインコンテンツにスキップ

Lenovo IdeaPad 100s-14IBR Speaker Replacement

必要な工具と部品

  1. Lenovo IdeaPad 100s-14IBR Speaker Replacement, Speaker: 手順 1、 1の画像 1
    • Remove the eight 4mm PH00 screws.

    • Remove the four 2mm PH00 screws.

  2. Lenovo IdeaPad 100s-14IBR Speaker Replacement: 手順 2、 2の画像 1 Lenovo IdeaPad 100s-14IBR Speaker Replacement: 手順 2、 2の画像 2
    • Use the nylon spudger to loosen the back cover from the back of the device.

    • You may hear a bit of a snapping sound, but this is normal.

  3. Lenovo IdeaPad 100s-14IBR Speaker Replacement: 手順 3、 1の画像 1
    • For safety reasons, disconnect the wires connecting the battery to the motherboard with the nylon spudger.

    • Remove the six 4mm Phillips #00 screws.

    • Remove the battery using the nylon spudger.

  4. Lenovo IdeaPad 100s-14IBR Speaker Replacement: 手順 4、 2の画像 1 Lenovo IdeaPad 100s-14IBR Speaker Replacement: 手順 4、 2の画像 2
    • Remove the four 2mm PH00 screws.

    • Unplug the speakers from the motherboard.

    • Remove the two 4mm PH00 screws from the metal shield on the trackpad.

    • Lift the metal shield up slightly, being very careful not to move the ribbon cables too much. Move the speaker cables out from under the shield.

  5. Lenovo IdeaPad 100s-14IBR Speaker Replacement: 手順 5、 1の画像 1
    • Lift the speakers from the case being careful of the wires connecting them. Put them to the side.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Bin Feng

メンバー登録日: 03/18/19

256 ポイント

2のガイドは作成済み

チーム

University of Memphis, Team S1-G3, Kim Spring 2019 University of Memphis, Team S1-G3, Kim Spring 2019人のメンバー

UM-KIM-S19S1G3

3 メンバー

9のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 4

今までの合計 391