メインコンテンツにスキップ

Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement

必要な工具と部品

  1. Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement, Stand Base: 手順 1、 1の画像 1
    • Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.

    • Make sure that the work surface is flat and has nothing sharp on it.

  2. Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement: 手順 2、 2の画像 1 Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement: 手順 2、 2の画像 2
    • Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.

  3. Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement, Back Cover: 手順 3、 1の画像 1
    • Remove the two screws on the bottom of the computer, one on each side.

  4. Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement: 手順 4、 3の画像 1 Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement: 手順 4、 3の画像 2 Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement: 手順 4、 3の画像 3
    • Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)

  5. Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement: 手順 5、 2の画像 1 Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement: 手順 5、 2の画像 2
    • Once it has been separated, lift to remove.

  6. Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement, Hard Drive: 手順 6、 2の画像 1 Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement, Hard Drive: 手順 6、 2の画像 2
    • Unscrew the four screws that secure the hard drive enclosure.

  7. Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement: 手順 7、 1の画像 1
    • Unplug the SATA cable. Lift to remove the hard drive enclosure.

  8. Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement: 手順 8、 2の画像 1 Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement: 手順 8、 2の画像 2
    • Unscrew the four screws that hold hard drive enclosure to the hard drive, located on the side of the enclosure.

  9. Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement: 手順 9、 1の画像 1
    • Lift the hard drive up to remove it from the enclosure.

終わりに

To reassemble your device, follow these instructions in reverse order.

12 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Jackson Blake

メンバー登録日: 01/22/18

1,119 ポイント

9のガイドは作成済み

チーム

Cal Poly, Team S16-G3, Banghart Winter 2018 Cal Poly, Team S16-G3, Banghart Winter 2018人のメンバー

CPSU-BANGHART-W18S16G3

4 メンバー

9のガイドは作成済み

5 件のコメント

you have been busy!!!!! Noticed the solutions , etc. below and that is impressive. chaosone7 @gmail.com

Bobby Kincannon - 返信

It’s nice and easy to get there, unfortunately the board was fried lol.

Charles Allen - 返信

Can I replace the hard drive with a 1TB SATA III 6Gb/s 4-bit QLC V-NAND Flash 1GB Cache 2.5" Solid State Drive - Samsung QVO

Donna Briggs - 返信

The hard drive in this should be a 2.5” drive, so the replacement you listed should work

Jackson Blake -

Do you have a better suggestion

Donna Briggs - 返信

コメントを追加

統計データ:

過去 24時間: 4

過去 7 日: 18

過去 30 日: 79

今までの合計 15,944