メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

This guide will show you how to safely remove and replace your lab top battery. There is no risk to replacing the battery.

  1. Turn off the computer.
    • Turn off the computer.

    • Disconnect the charger from the computer.

    • Flip the computer upside down.

  2. Essential Electronics Toolkit

    Small Toolkit. Big Possibilities.

    Shop Toolkits

    Essential
    Electronics
    Toolkit

    Shop Toolkits
  3. Push the right-hand switch outward into the "unlocked" position. Push the right-hand switch outward into the "unlocked" position.
    • Push the right-hand switch outward into the "unlocked" position.

  4. While holding the battery, use your other hand to push the left clip to the left and pull the battery out. While holding the battery, use your other hand to push the left clip to the left and pull the battery out. While holding the battery, use your other hand to push the left clip to the left and pull the battery out.
    • While holding the battery, use your other hand to push the left clip to the left and pull the battery out.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Carlo Calvillo

メンバー登録日: 2016年09月26日

742 ポイント

6のガイドは作成済み

チーム

Eastern Washington University, Team 1-4, Crane Fall 2016 Eastern Washington University, Team 1-4, Crane Fall 2016人のメンバー

EWU-CRANE-F16S1G4

4 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 23

今までの合計 577