メインコンテンツにスキップ

はじめに

The charging port of any device is a vital component for the life of the device. This guide will help you replace the charging port of the LG Volt.

  1. Pry back cover with finger in the crease. Remove back casing. Remove back casing.
    • Pry back cover with finger in the crease.

    • Remove back casing.

  2. With your finger, pry the battery out through the crease made for removal. With your finger, pry the battery out through the crease made for removal. With your finger, pry the battery out through the crease made for removal.
    • With your finger, pry the battery out through the crease made for removal.

  3. Remove all 11 (4mm) screws with the JIS #000 screwdriver There are three screws on top, three above the battery, one next to the battery, one under the battery and three at the bottom of the phone. There are three screws on top, three above the battery, one next to the battery, one under the battery and three at the bottom of the phone.
    • Remove all 11 (4mm) screws with the JIS #000 screwdriver

    • There are three screws on top, three above the battery, one next to the battery, one under the battery and three at the bottom of the phone.

  4. Use the plastic opening tool to remove the back housing from the frame of the phone. Use the plastic opening tool to remove the back housing from the frame of the phone. Use the plastic opening tool to remove the back housing from the frame of the phone.
    • Use the plastic opening tool to remove the back housing from the frame of the phone.

  5. Lift copper tab located on the right side of the device.
    • Lift copper tab located on the right side of the device.

  6. Use a JIS #000 screwdriver to remove the 1 screw (4mm) on right side under copper tab. Use a JIS #000 screwdriver to remove the screw (4mm) on bottom left under battery tray.
    • Use a JIS #000 screwdriver to remove the 1 screw (4mm) on right side under copper tab.

    • Use a JIS #000 screwdriver to remove the screw (4mm) on bottom left under battery tray.

  7. Disconnect the white and black cables as indicated. Lift indicated flap as shown. Lift indicated flap as shown.
    • Disconnect the white and black cables as indicated.

    • Lift indicated flap as shown.

  8. Use the plastic opening tool to carefully lift the charger assembly from the phone. Start from the copper tab and continue in a clockwise direction. Once it is loose remove the assembly from the phone.
    • Use the plastic opening tool to carefully lift the charger assembly from the phone.

    • Start from the copper tab and continue in a clockwise direction.

    • Once it is loose remove the assembly from the phone.

  9. Put a new charging port in place of old charging port.
    • Put a new charging port in place of old charging port.

    • Follow steps 8 through 1 in that order for reassembly.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Adrian Soldan

メンバー登録日: 2017年09月25日

464 ポイント

4のガイドは作成済み

チーム

USF Tampa, Team S3-G3, Cannon Fall 2017 USF Tampa, Team S3-G3, Cannon Fall 2017人のメンバー

USFT-CANNON-F17S3G3

3 メンバー

4のガイドは作成済み

2 件のコメント

Great guide with excellent pictures

George Brooks - 返信

Hi, I replaced mine, but I don’t think it’s working - what voltages should be present on which pins (at the battery connection) when it’s plugged in?

scottlhertzoglion - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 3

今までの合計 389