メインコンテンツにスキップ

LG VX8700 Camera Replacement

必要な工具と部品

  1. LG VX8700 Camera Replacement, Battery: 手順 1、 2の画像 1 LG VX8700 Camera Replacement, Battery: 手順 1、 2の画像 2
    • Make sure the phone is completely off.

    • Remove the back cover by sliding the tab away from the phone using one finger.

  2. LG VX8700 Camera Replacement: 手順 2、 2の画像 1 LG VX8700 Camera Replacement: 手順 2、 2の画像 2
    • Lift one side of the battery using a plastic opening tool or your fingers.

    • Carefully remove the battery and set it aside.

    • When installing the new battery, make sure to align the metal pins with those of the phone.

  3. LG VX8700 Camera Replacement, Front Bezel: 手順 3、 1の画像 1
    • Turn your phone around and open the flip phone.

    • Locate the two grey rubber plugs on the LCD portion of the phone. These plugs cover up two screws.

    • Remove the two grey screw-covers at the bottom of the screen

  4. LG VX8700 Camera Replacement: 手順 4、 2の画像 1 LG VX8700 Camera Replacement: 手順 4、 2の画像 2
    • Remove the screen by using the tab to eject the screen.

    • There is a gap between the case and the screen near the ear piece

    • Insert the plastic opening tool in the gap and pry the screen up.

    • The plastic screen cover is glued onto the phone, do not be alarmed if it may be difficult to pry it off.

  5. LG VX8700 Camera Replacement: 手順 5、 1の画像 1
    • Unscrew the four corner 3.21mm screws to separate the the top cover of the phone

  6. LG VX8700 Camera Replacement: 手順 6、 2の画像 1 LG VX8700 Camera Replacement: 手順 6、 2の画像 2
    • Turn your phone around

    • Remove the top cover of the phone by inserting the plastic opening tool into the groove.

    • Carefully open the cover.

  7. LG VX8700 Camera Replacement, Camera: 手順 7、 1の画像 1
    • Now we have the LCD outer case off. The LCD display can be seen on the left, the camera on the right.

    • Place the phone assembly down, it is not needed anymore.

  8. LG VX8700 Camera Replacement: 手順 8、 1の画像 1
    • To remove the camera the ribbon connector should be removed.

    • This ribbon connector is glued to the case, using the plastic opening tool pry the connector off.

  9. LG VX8700 Camera Replacement: 手順 9、 1の画像 1
    • The camera should come loose after the connector is pried off.

    • Take the new camera and apply a small square of double sided tape to the new ribbon connector.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

6人の作成者と共同で作成されました。

Andrew

メンバー登録日: 01/20/12

7 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 8-16, Maness Winter 2012 Cal Poly, Team 8-16, Maness Winter 2012人のメンバー

CPSU-MANESS-W12S8G16

4 メンバー

14のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 655