はじめに

Phone lacking intelligence? Replace your logic board.

パーツ

パーツは必要ありません。

  1. Lay the phone face down with the screen in palm of hand.
    • Lay the phone face down with the screen in palm of hand.

    • Slide the grey button towards the top of the phone.

  2. While the button is slid up grab the battery on the sides and pull up with the bottom remaining in place.
    • While the button is slid up grab the battery on the sides and pull up with the bottom remaining in place.

    • Pull the battery up vertically to completely remove from phone.

  3. Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

    当社のショップを閲覧する
  4. Remove four screws beneath battery using screw driver.
    • Remove four screws beneath battery using screw driver.

    • Remove three rubber screw covers with tweezers.

    • Remove the three screws under the covers with the screwdriver.

  5. Detach outer casing from back of phone.
    • Detach outer casing from back of phone.

    • NOTE: There will be a significant amount of resistance to detaching the back casing.

  6. Unsnap gold rectangular plate and silver square plate from the logic board.
    • Unsnap gold rectangular plate and silver square plate from the logic board.

  7. Remove logic board, being careful not to remove any other pieces.
    • Remove logic board, being careful not to remove any other pieces.

    • Insert new logic board with white side facing down.

    • NOTE: Make sure side buttons on logic board are correctly aligned to avoid future complications.

まとめ

To reassemble your device, follow these instructions in reverse order.

Nichole Shaw

メンバー登録日: 2010年04月13日

1 ポイント

7のガイドは作成済み

チーム

Cal Poly, Team 18-75, Johann Spring 2010 Cal Poly, Team 18-75, Johann Spring 2010人のメンバー

CPSU-JOHANN-S10S18G75

4 メンバー

14のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 1,240