メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Shows how to remove the rear case to access all of the internals of the phone.

  1. Turn the closed phone so that the back panel is facing you.
    • Turn the closed phone so that the back panel is facing you.

    • Press down and forward firmly on the gray tab in the middle of the phone.

  2. Now just lift up on the battery and remove it from the phone. Now just lift up on the battery and remove it from the phone.
    • Now just lift up on the battery and remove it from the phone.

  3. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る
  4. Remove the rubber grommet using a Spudger.
    • Remove the rubber grommet using a Spudger.

  5. Be sure not to lose the screws. They are small!
    • Be sure not to lose the screws. They are small!

    • Remove the five screws using a Phillips #00 Screwdriver.

  6. When removing back cover, be careful not to break the speaker wires. Using an iPod Opening Tool, carefully pry off the back cover. Using Tweezers, gently pull speaker wires out.
    • When removing back cover, be careful not to break the speaker wires.

    • Using an iPod Opening Tool, carefully pry off the back cover.

    • Using Tweezers, gently pull speaker wires out.

  7. Separate the two halves.
    • Separate the two halves.

終わりに

To reassemble your device, follow these instructions in reverse order.

Matthew Hagan

メンバー登録日: 2010年04月12日

5 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 25-88, Amido Spring 2010 Cal Poly, Team 25-88, Amido Spring 2010人のメンバー

CPSU-AMIDO-S10S25G88

4 メンバー

18のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 1,409