メインコンテンツにスキップ

このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。

必要な工具と部品

  1. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 1、 1の画像 1
    • Hold antenna between your fingers and unscrew in a counterclockwise direction.

  2. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 2、 1の画像 1
    • You will remove antenna by pulling it in an upward motion away from the socket.

  3. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 3、 1の画像 1
    • Turn phone so that the back is facing you.

  4. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 4、 1の画像 1
    • Use your thumb to pull the tab in an upward motion to release the battery.

  5. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 5、 1の画像 1
    • Hold phone securely in one hand and pull the battery away from the phone with your other hand.

  6. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 6、 1の画像 1
    • Use your screwdriver to unscrew the four screws from the back plate.

  7. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 7、 1の画像 1
    • Turn phone to the side as indicated in the picture.

  8. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 8、 1の画像 1
    • Remove the back cover that you just unscrewed and set aside.

  9. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 9、 1の画像 1
    • Open the remaining parts like a book but do not separate the two pieces.

    • Do not tear the tape connecting the two pieces.

  10. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 10、 2の画像 1 : 手順 10、 2の画像 2
    • Rotate the phone so that the circuit board is in the palm of your hand and the part connected with tape hangs behind.

    • Use your opening tool to pry the circuit board from the front cover. Do not let the number pad to fall out.

  11. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 11、 1の画像 1
    • To remove the microphone, insert your opening tool under microphone and push upward to pry microphone away from the front cover.

ゴール

ある他の人がこのガイドを完成しました。

作成者

8人の作成者と共同で作成されました。

Johnny Inlow

メンバー登録日: 04/10/10

19 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 27-91, Amido Spring 2010 Cal Poly, Team 27-91, Amido Spring 2010人のメンバー

CPSU-AMIDO-S10S27G91

5 メンバー

11のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 3

過去 30 日: 5

今までの合計 1,292