メインコンテンツにスキップ
  1. この手順は未翻訳です。 翻訳を手伝う。

    Use a plastic opening tool to seperate the back panel from the device. Remove the back panel.
    • Use a plastic opening tool to seperate the back panel from the device.

    • Remove the back panel.

  2. この手順は未翻訳です。 翻訳を手伝う。

    Place your thumb along the bottom of the battery and pry upwards to remove.
    • Place your thumb along the bottom of the battery and pry upwards to remove.

  3. この手順は未翻訳です。 翻訳を手伝う。

    Press down on the SIM eject tab with a fingernail (or iFixit opening tool), and slide the SIM card out.
    • Press down on the SIM eject tab with a fingernail (or iFixit opening tool), and slide the SIM card out.

  4. この手順は未翻訳です。 翻訳を手伝う。

    Remove the eight Phillips #0 screws from the internal support frame. Remove the eight Phillips #0 screws from the internal support frame.
    • Remove the eight Phillips #0 screws from the internal support frame.

  5. この手順は未翻訳です。 翻訳を手伝う。

    Use an opening tool on the marked locations to lift the edges up. There should be a small click when lifting these edges up. Use an opening tool on the marked locations to lift the edges up. There should be a small click when lifting these edges up. Use an opening tool on the marked locations to lift the edges up. There should be a small click when lifting these edges up.
    • Use an opening tool on the marked locations to lift the edges up. There should be a small click when lifting these edges up.

  6. この手順は未翻訳です。 翻訳を手伝う。

    Using your hand, pick up the midframe to  separate it from the phone.
    • Using your hand, pick up the midframe to separate it from the phone.

    • If the midframe does not want to lift off, go back and repeat step 6.

  7. この手順は未翻訳です。 翻訳を手伝う。

    Detach the screen connector from the motherboard by putting your thumb underneath it and lifting up. The screen connector is the part that has P5 written on it.
    • Detach the screen connector from the motherboard by putting your thumb underneath it and lifting up.

    • The screen connector is the part that has P5 written on it.

  8. この手順は未翻訳です。 翻訳を手伝う。

    On the side with the screen connector, pull the two tabs away from the device.
    • On the side with the screen connector, pull the two tabs away from the device.

    • Use the plastic opening tool to lift the motherboard starting on the bottom right corner and pulling upwards.

ゴール

ある他の人がこのガイドを完成しました。

Erika Heppner

メンバー登録日: 2018年02月21日

316 ポイント

4のガイドは作成済み

チーム

University of North Texas, Team S4-G6, Thompson Spring 2018 University of North Texas, Team S4-G6, Thompson Spring 2018人のメンバー

UNT-THOMPSON-S18S4G6

4 メンバー

14のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 184