LG Optimus Exceed 2 Screen Replacement

作成者： Carl Dorvilus (そして 5 人のその他投稿者)

コメント: 0
お気に入り: 1

難易度

普通

手順

所要時間

必要時間を提案??

はじめに

If the screen is cracked or scratched on your LG Optimus Exceed 2 phone you might want to replace the screen. Another reason for you to replace your screen is if the touch screen feature does not work. Please follow these steps below to replace the screen of your phone.

ツール

これらのツールを購入する

パーツ

パーツは指定されていません。

手順1 Battery

Flip the device over and remove the back covering.

Flip the device over and remove the back covering.

編集

手順2

Push on the top of the battery downward and pull the battery off of the device.

Push on the top of the battery downward and pull the battery off of the device.

編集

手順3 Rear Camera

Remove the eleven 4mm screws using a Philips head screw driver.

Remove the eleven 4mm screws using a Philips head screw driver.

編集

手順4

Insert the plastic opening tool into the side of the device and pry off silver covering. Push up against the back covering when the tool is inserted to detach from the phone.

Make sure to detach all sides of silver covering before lifting it off the phone.

Insert the plastic opening tool into the side of the device and pry off silver covering. Push up against the back covering when the tool is inserted to detach from the phone.
Make sure to detach all sides of silver covering before lifting it off the phone.

編集

手順5

Using the prying tool detach the connector on the device.

Insert the plastic opening tool underneath the connector and push tool down to lift the connector from the device.

Using the prying tool detach the connector on the device.
Insert the plastic opening tool underneath the connector and push tool down to lift the connector from the device.

編集

手順6

Using tweezers lift the camera off of the device.

To do so grasp the camera gently with the tweezers and pull the camera up out of the device.

Using tweezers lift the camera off of the device.
To do so grasp the camera gently with the tweezers and pull the camera up out of the device.

編集

手順7 Motherboard

Disconnect the remaining ribbon plugs and connectors. (Only remove the highlighted cables for the removal of the logic board.)

Disconnect the remaining ribbon plugs and connectors. (Only remove the highlighted cables for the removal of the logic board.)

編集

手順8

Push the blue lifting tool up underneath the logic board and pull it upwards removing it from the device.

Push the blue lifting tool up underneath the logic board and pull it upwards removing it from the device.

編集

手順9 Screen

Using a prying tool, carefully remove the silver/ black tape used to hide the screens connectors.

Using a prying tool, carefully remove the silver/ black tape used to hide the screens connectors.

編集

手順10

Using the blue lifting tool carefully remove the screens connectors.

Using the blue lifting tool carefully remove the screens connectors.

編集

手順11

Flip the device so the screen faces you. Using a prying tool, at the corners on the screen begin to pry off the screen. (It will sound like tape being removed.) Avoid scratching the device with the prying tool.

Flip the device so the screen faces you. Using a prying tool, at the corners on the screen begin to pry off the screen. (It will sound like tape being removed.) Avoid scratching the device with the prying tool.

編集