メインコンテンツにスキップ

このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。

必要な工具と部品

  1. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 1、 2の画像 1 : 手順 1、 2の画像 2
    • Make sure not to push the tool into the USB port. Doing so may cause damage to your phone.

    • Hold the blue plastic opening tool at the edge of the USB opening. Push down and pry the case off the phone gently.

  2. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 2、 1の画像 1
    • Lift the battery out of the phone and replace with your new one.

  3. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 3、 1の画像 1
    • Grab the end of the SD Card and pull it out of the phone.

  4. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 4、 2の画像 1 : 手順 4、 2の画像 2
    • Use the PH #000 screwdriver to remove the six screws from the midframe

  5. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 5、 2の画像 1 : 手順 5、 2の画像 2
    • Using the plastic opening tool, work gently to go around the perimeter of the phone and remove the midframe.

  6. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 6、 3の画像 1 : 手順 6、 3の画像 2 : 手順 6、 3の画像 3
    • Use the plastic opening tool to disconnect the small orange tab from the motherboard.

    • Next disconnect the silver tab slightly above where the orange tab was.

  7. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 7、 1の画像 1
    • Gently feed the orange and silver tabbed ribbons through the hole in the motherboard and the screen will be free.

ゴール

6 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Patrick Barron

メンバー登録日: 10/08/14

158 ポイント

1ガイドが承認済み

チーム

USF Tampa, Team 14-3, Leahy Fall 2014 USF Tampa, Team 14-3, Leahy Fall 2014人のメンバー

USFT-LEAHY-F14S14G3

4 メンバー

3のガイドは作成済み

コメント 1 件

My screen is black but everything else works (even the touch screen -- I can use it to answer calls). I used this guide to change the screens from a working phone - but my screen is still black! Anyone have any ideas?

Jack - 返信

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 9

過去 30 日: 9

今までの合計 2,281