メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

パーツ

パーツは指定されていません。

  1. Slide the battery cover release towards top of phone. Place one finger at each side of the battery cover.
    • Slide the battery cover release towards top of phone.

    • Place one finger at each side of the battery cover.

    • Lift and remove the battery cover.

  2. Place a finger at the top corner of the battery and lift out of the phone. Place a finger at the top corner of the battery and lift out of the phone.
    • Place a finger at the top corner of the battery and lift out of the phone.

  3. 全てのタブを開く

    Mac用RAMアップグレードキット

    キット商品を見る

    どれだけタブを開いても
    十分に足りるRAM容量

    キット商品を見る
  4. Use the spudger to lift up the two screw covers at the top of the phone. Remove all four Phillips#00 (3.3mm) screws with screwdriver.
    • Use the spudger to lift up the two screw covers at the top of the phone.

    • Remove all four Phillips#00 (3.3mm) screws with screwdriver.

  5. Use the spudger to lift up the rear case from the phone. Note: Rear case is connected on all sides and will have to be detached on all sides before removal. Remove the rear case from the device.
    • Use the spudger to lift up the rear case from the phone.

    • Note: Rear case is connected on all sides and will have to be detached on all sides before removal.

    • Remove the rear case from the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

Matthew Cataldo

メンバー登録日: 2012年01月23日

1 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 3-29, Amido Winter 2012 Cal Poly, Team 3-29, Amido Winter 2012人のメンバー

CPSU-AMIDO-W12S3G29

4 メンバー

14のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 499