メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Use this guide to remove the speakers from the device.

パーツ

パーツは指定されていません。

  1. Use the spudger to pry out the indicated rubber squares. Use the #0 Phillips screwdriver to take out the revealed screws. Use the #0 Phillips screwdriver to take out the revealed screws.
    • Use the spudger to pry out the indicated rubber squares.

    • Use the #0 Phillips screwdriver to take out the revealed screws.

  2. Carefully lodge the spudger between the face plate and the hinge mechanism. Gently pry the face plate until it releases from place holders. Gently pry the face plate until it releases from place holders.
    • Carefully lodge the spudger between the face plate and the hinge mechanism.

    • Gently pry the face plate until it releases from place holders.

  3. Using a spudger, detach the speakers from their place holders. Using a spudger, detach the speakers from their place holders.
    • Using a spudger, detach the speakers from their place holders.

  4. Using the spudger, pry between the speaker circuit board and base to detach with ease.
    • Using the spudger, pry between the speaker circuit board and base to detach with ease.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Harry Black

メンバー登録日: 2010年04月20日

56 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 10-44, Garner Spring 2010 Cal Poly, Team 10-44, Garner Spring 2010人のメンバー

CPSU-GARNER-S10S10G44

4 メンバー

18のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,456