はじめに
This guide will show you how to replace the motherboard in your LG G Watch.
必要な工具と部品
-
-
Use the T5 Torx screwdriver to unscrew the four silver 2mm x 3mm T5 screws that hold the back cover in place.
-
-
-
-
Use the spudger to gently lift up and disconnect the display connector.
-
Now use the spudger to disconnect the digitizer connector.
-
もう少しです!
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.
4 の人々がこのガイドを完成させました。