メインコンテンツにスキップ

このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。

必要な工具と部品

  1. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 1、 2の画像 1 : 手順 1、 2の画像 2
    • With the tablet face down, pull the SD card slot cover out.

    • Using a Phillips #000 screwdriver, remove the 3mm screw located in the SD card slot.

  2. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 2、 3の画像 1 : 手順 2、 3の画像 2 : 手順 2、 3の画像 3
    • Insert a plastic opening tool in the small crevasse between the screen and the back panel.

    • Pry the screen away from the back panel.

    • Repeat this on each edge of the device.

    • We found it helpful to leave multiple plastic opening tools wedged in the crevasse to prevent it from closing.

    • This requires heavy force. The back of the device is attached with an adhesive. If the back panel is too hard to remove, use the iOpener.

    My old G-Pad had its screen separated from the rest of the front part and the back panel, so if you have just a slim glass come off, do not pull that off. Use a flat spudger to loosen those hooks and help the rest of the front part come out with the screen attached.

    George - 返信

  3. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 3、 2の画像 1 : 手順 3、 2の画像 2
    • After using the plastic opening tools, pry the device open with your hands.

    • Remove the back panel from the screen.

  4. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 4、 2の画像 1 : 手順 4、 2の画像 2
    この手順で使用する道具:
    Magnetic Project Mat
    $19.95
    購入する
    • Remove the four 3 mm Phillips #000 screws that are attached to the speaker.

    • These screws are very small so make sure to keep track of them. You can use iFixit's Pro Magnetic Project Mat to help.

    On the VK810 Model you have to watch out for the antenna wire that runs along and is attached to the speaker by the means of a metal wire clip.

    What I would recommend is detaching the antenna wire from the top of the device then gently remove it from the clip.

    Then remove the speaker.

    On a side note does anyone know where to buy the little ant wire that runs across the speaker?

    Kyle - 返信

  5. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 5、 1の画像 1
    • Use your fingers to remove the speaker.

  6. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 6、 2の画像 1 : 手順 6、 2の画像 2
    • Remove the 3mm Phillips #000 screws from the corners of the battery.

  7. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 7、 3の画像 1 : 手順 7、 3の画像 2 : 手順 7、 3の画像 3
    • Using a spudger or a plastic opening tool, disconnect the ribbon cable from the right side of the device.

    • The cable is attached with an adhesive.

    • These images use a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.

  8. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 8、 2の画像 1 : 手順 8、 2の画像 2
    • Using the Phillips #000 screwdriver, remove the two 3mm screws located at the bottom of the ribbon cable.

    • Remove the ribbon cable from the device.

  9. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 9、 2の画像 1 : 手順 9、 2の画像 2
    • Unhook the battery from the top of the device.

    Watch out: I had to remove the mainboard first, before being able to lift the battery with its attached hook on top.

    Sven Meier - 返信

    The screen on my device separated from the main board which is still in the back of the device. I can’t get to the under side to remove the speakers and battery.

    Chris C - 返信

ゴール

18 の人々がこのガイドを完成させました。

作成者

7人の作成者と共同で作成されました。

Mario Salguero

メンバー登録日: 09/14/15

781 ポイント

6のガイドは作成済み

チーム

CSU Fullerton, Team 1-6, Bruce Fall 2015 CSU Fullerton, Team 1-6, Bruce Fall 2015人のメンバー

CSUF-BRUCE-F15S1G6

4 メンバー

14のガイドは作成済み

9 件のコメント

Every teardown I can find on this tablet has that darn screw in the sd card slot, but mine does not!! Does ANYBODY have teardown for mine? I can send pics, it's Verizon Gpad 8.3 LTE, slot holds sd and sim but NO screw. Son spilled water on it so screen is all dark and haptic stays on, I'd like to attempt the rice trick if I can open it.

Wesley Krasko - 返信

The other models have a sponge adhesive on the back of the battery.

Completely disregard the first screw.

supramaster2099 -

Wesley - Me too. I have no idea why Android released two different models with the same freaking model name. I thought they had more common sense than that. If anyone has the teardown for the new model, holler.

Slavelike Constructs - 返信

Same here. No screw

jon - 返信

sorry this teardown is not for the 8.3

krackeddude - 返信

I have the VK810, can't find instructions anywhere.

I also have no screw, but I got it open by starting on the right side and fitting a flat spudger between the frame and the screen and pressing the tool deeper towards the back. This unlocks the snap. There are 5 of these plastic snaps built into the body of the frame on the long sides and a few along the top and bottom. Once I got the right side slightly separated, I worked on the top, then the bottom (used 2 spudgers, one kept the gap open on the side while I worked the top and bottom), then continued inserting the tool along the left side until all the lock tabs were released. The internals look the same as these pics once I got it open. I need to replace the charger plug and will swap the battery as well while I'm at it.

Barrett Abney - 返信

so, where can I get a replacement battery from?

dalemcginnis - 返信

This is not the vk810. Its the v500. It is wifi only

Justin Jantzen - 返信

There is a difference that was notice in my comparison between this Guide and the LG G Pad X 8.3 Guide. This guide has only three (3) screws holding the battery and much more removal of parts than the X 8.3. The X 8.3 also has four (4) screws holding it in. Is the X 8.3 shown on this site the same as the one used by Verizon ? I do Not know, if there is a difference, currently.

This looks to be a helpful Guide, but there is no help in WHERE to purchase a battery and if there could be a different battery with higher capacity and a longer life as a choice. As a Consumer, this type of information would be helpful. Can anyone assist ?

Harvey Rothenberg - 返信

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 18

過去 30 日: 64

今までの合計 44,276