キャンセル

LG Chocolate 3 Rear Case Replacement

作成者： Brenna Yagade (そして 13 人のその他投稿者)

コメント: 0
お気に入り: 0

LG Chocolate 3 Rear Case Replacement

難易度

普通

手順

7

所要時間

45分

はじめに

Use this guide to replace a damaged or cracked rear case. Be prepared to manage small screws.

ツール

これらのツールを購入する

パーツ

パーツは指定されていません。

手順1 Battery

Turn the phone off before starting the replacement process.

Turn the phone off before starting the replacement process.
Place the phone face down.
Press your finger down on the indentation and slide the back plate off.

手順2

Using your index finger lift and remove the battery from the phone.

Using your index finger lift and remove the battery from the phone.

Using your index finger lift and remove the battery from the phone.

Using your index finger lift and remove the battery from the phone.

手順3 Rear Case

Use the pointed end of the spudger to pull out the plastic inserts that are located on the left and right-hand corners.

Use the pointed end of the spudger to pull out the plastic inserts that are located on the left and right-hand corners.
If needed, use the tip of a push pin instead of the spudger to remove the plastic inserts.

手順4

Using a Phillips #00 screwdriver, remove the six 3mm long screws found along the edges of the phone.

Using a Phillips #00 screwdriver, remove the six 3mm long screws found along the edges of the phone.
If needed, use tweezers to remove loose screws from the recessed holes.
Screws are small, therefore, they should be placed in a secure location to prevent misplacement.

手順5

Pull the rear case up using the spudger.

The rear case is connected to the right side of the phone via red and blue cables, be careful not to pull these cables out.

Pull the rear case up using the spudger.
The rear case is connected to the right side of the phone via red and blue cables, be careful not to pull these cables out.
The volume control buttons on the side might fall out of their sockets. Carefully replace them with a pair of tweezers before you reassemble the rear case.

手順6

Use tweezers to pull the clear end of the red and blue speaker cables away from motherboard.

Use tweezers to pull the clear end of the red and blue speaker cables away from motherboard.

手順7

Carefully remove the rear case from the phone.

Carefully remove the rear case from the phone.

Carefully remove the rear case from the phone.

まとめ

To reassemble your device, follow these instructions in reverse order.

作成者

13他の投稿者と一緒に

Brenna Yagade

メンバー登録日: 2013年04月15日

22 ポイント

6のガイドは作成済み

+6 個以上のバッジ

チーム

Cal Poly, Team 12-35, Amido Spring 2013 Cal Poly, Team 12-35, Amido Spring 2013人のメンバー

CPSU-AMIDO-S13S12G35

5 メンバー

12のガイドは作成済み

0コメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 230