LG CU400 Bottom Half Assembly Replacement

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

はじめに

This guide will help you disassemble the bottom half of the phone. By completing this you will gain access to the motherboard and charging port for replacement.

必要な工具と部品

手順1 Battery

LG CU400 Bottom Half Assembly Replacement, Battery: 手順 1、 2の画像 1

LG CU400 Bottom Half Assembly Replacement, Battery: 手順 1、 2の画像 2

Push the button labeled 'PUSH' on the rear cover.

翻訳

手順2

LG CU400 Bottom Half Assembly Replacement: 手順 2、 3の画像 3

Slide the rear cover towards you.

翻訳

手順3

To remove the battery, grasp the top front edge of the battery and pull the battery away from the phone.
When installing the new battery, have the metal contacts of the phone match up with the metal contacts of the battery.

翻訳

手順4 Bottom Half Assembly

LG CU400 Bottom Half Assembly Replacement, Bottom Half Assembly: 手順 4、 2の画像 1

LG CU400 Bottom Half Assembly Replacement, Bottom Half Assembly: 手順 4、 2の画像 2

Remove the sim card by sliding the card out from under the retainer using either your fingers or a spudger.

翻訳

手順5

Remove the rubber covers in the highlighted locations using a metal spudger.

翻訳

手順6

Remove the six 3mm #000 flat Phillips head screws from the back of the phone using a Phillips #000 Screwdriver.

翻訳

手順7

Remove the headphone jack cover with your finger or metal spudger.

翻訳

手順8

LG CU400 Bottom Half Assembly Replacement: 手順 8、 3の画像 3

Insert the metal spudger between the keypad assembly and back cover assembly and pry the two assemblies apart.
Pry gently as to not break the plastic clips that hold the two assemblies together.
Work your way around the perimeter of the phone with the metal spudger to separate the two assemblies.