メインコンテンツにスキップ

はじめに

How to remove the keypad from an LG CG180 cell phone.

パーツ

パーツは指定されていません。

  1. Power down the cell phone by pressing and holding down the red "end call" button.
    • Power down the cell phone by pressing and holding down the red "end call" button.

  2. Turn the phone screen-down so you are looking at the back cover.
    • Turn the phone screen-down so you are looking at the back cover.

  3. Slide the back cover down using your finger to remove the cover from the phone. Slide the back cover down using your finger to remove the cover from the phone.
    • Slide the back cover down using your finger to remove the cover from the phone.

  4. Place your finger at the top of the battery in small gap.
    • Place your finger at the top of the battery in small gap.

  5. PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る

    PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る
  6. Press downward while pulling outward to remove the battery.
    • Press downward while pulling outward to remove the battery.

  7. Remove all four screws on the back of the phone using a Phillips #00 screwdriver.
    • Remove all four screws on the back of the phone using a Phillips #00 screwdriver.

  8. Insert a plastic opening tool in the seam.
    • Insert a plastic opening tool in the seam.

  9. Run the tool along the seam to release all the tabs. Run the tool along the seam to release all the tabs.
    • Run the tool along the seam to release all the tabs.

  10. Pull the phone back cover off once all the tabs are released. Pull the phone back cover off once all the tabs are released.
    • Pull the phone back cover off once all the tabs are released.

  11. Push the contents of the phone away from the hardshell case by applying pressure to the keypad with both thumbs.
    • Push the contents of the phone away from the hardshell case by applying pressure to the keypad with both thumbs.

  12. The hardshell case is separated from the rest of the phone.
    • The hardshell case is separated from the rest of the phone.

  13. Separate keypad from circuit board by turning it upside down and allowing it to fall off. Separate keypad from circuit board by turning it upside down and allowing it to fall off.
    • Separate keypad from circuit board by turning it upside down and allowing it to fall off.

まとめ

To reassemble your device, follow these instructions in reverse order.

Alex Jacobs

メンバー登録日: 2010年01月21日

5 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 14-42, Regan Winter 2010 Cal Poly, Team 14-42, Regan Winter 2010人のメンバー

CPSU-REGAN-W10S14G42

4 メンバー

10のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 1,322