はじめに

To isolate the LCD screen, one needs to be gentle with separating parts and removing screws from the camera.

パーツ

パーツは必要ありません。

Unscrew the two 2.9 mm screws on the side of the screen that connect the front and back cover of the LCD screen. Use a #00 screwdriver.
  • Unscrew the two 2.9 mm screws on the side of the screen that connect the front and back cover of the LCD screen. Use a #00 screwdriver.

コメントを追加する

Unscrew the 2.9 mm side screws on the other side of the screen using the #00 screwdriver. These also hold the screen covers together. To get to the second screw, rotate the screen.
  • Unscrew the 2.9 mm side screws on the other side of the screen using the #00 screwdriver. These also hold the screen covers together.

  • To get to the second screw, rotate the screen.

コメントを追加する

Gently peel off the front and back cover of the screen. Peel back the plastic cover. Peel back the plastic cover.
  • Gently peel off the front and back cover of the screen.

  • Peel back the plastic cover.

コメントを追加する

Gently pull off the screen from the base.
  • Gently pull off the screen from the base.

  • A small metal piece between the screen cover and the screen may fall out during repair. Remember to replace it with the rounded corners facing away from the screen during reassembly.

  • This takes a little force.

コメントを追加する

Unplug the wires that are attaching the screen to the circuit board.
  • Unplug the wires that are attaching the screen to the circuit board.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

konrad

メンバー登録日: 2011年01月11日

214 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 7-31, Regan Winter 2011 Cal Poly, Team 7-31, Regan Winter 2011人のメンバー

CPSU-REGAN-W11S7G31

6 メンバー

6のガイドは作成済み

コメント1件

MY screen is dark after touched water, do I need to change this screen? Where can I buy this screen? How much?

Thank you for the guidance.

jennifer

yu123xi@yahoo.com

yu123xi - 返信

コメントを追加する

統計データを表示:

過去 24時間: 3

過去 7 日: 6

過去 30 日: 11

今までの合計 3,254