難易度
普通
手順
3
所要時間
30分
- Capacitors 3手順
メンバーによる寄稿ガイド
私たちのコミュニティーの素晴らしいメンバーがこのガイドを作成しました。これはiFixitスタッフによって管理されていません。
はじめに
The TV turns off by itself after a while or the TV will not start, blown off capacitors could be the source off error.
-
MAKE SURE THAT YOUR DEVICE IS UNPLUGED!
-
Open the case carefully while loosing the marked srews.
-
Check the power-board. If there are any blown-up capacitors, you should replace them.
-
For removing the capacitors, remove the board, take a soldering bolt and heat the solder points at the back of the board.
-
Insert the replacement capacitors and solder it. Check the poles!
-
Note: If you are not sure about the condition of the capacitors you can prove it with a good measuring device after the expansion.
Not all capacitors are need in any case. To reassemble your device, follow these instructions in reverse order.
Not all capacitors are need in any case. To reassemble your device, follow these instructions in reverse order.
7 の人々がこのガイドを完成させました。
