メインコンテンツにスキップ

はじめに

Providing information to disassemble the phone and replace the screen.

パーツ

パーツは指定されていません。

  1. Kyocera Oystr Screen Replacement, Removing the battery: 手順 1、 3の画像 1 Kyocera Oystr Screen Replacement, Removing the battery: 手順 1、 3の画像 2 Kyocera Oystr Screen Replacement, Removing the battery: 手順 1、 3の画像 3
    • Make sure the phone is turned off before disassembly.

    • Lift the bottom of the phone's back cover upwards, revealing the phone's battery housing.

    • Remove the battery from the casing. This is simply a precaution.

    • Turn the phone over so that the front side is facing you. Flip open the device in preparation for the next step.

  2. Kyocera Oystr Screen Replacement, Removing screws from screen: 手順 2、 3の画像 1 Kyocera Oystr Screen Replacement, Removing screws from screen: 手順 2、 3の画像 2 Kyocera Oystr Screen Replacement, Removing screws from screen: 手順 2、 3の画像 3
    • Peel the Virgin Mobile sticker from the phone's screen, revealing two screws beneath it.

    • Using the Tri-Wing Y0 screwdriver, remove the two screws from the screen.

  3. Kyocera Oystr Screen Replacement, Exposing internal components: 手順 3、 3の画像 1 Kyocera Oystr Screen Replacement, Exposing internal components: 手順 3、 3の画像 2 Kyocera Oystr Screen Replacement, Exposing internal components: 手順 3、 3の画像 3
    • Lift the plastic cover of the phone screen upwards by prying around the perimeter of the screen with a plastic opening tool.

    • After lifting the plastic cover from the screen, remove the two screws from the metal cover holding the screen in place.

  4. Kyocera Oystr Screen Replacement, Removing metal cover: 手順 4、 1の画像 1
    • Remove metal cover by lifting up and away from the device.

  5. Kyocera Oystr Screen Replacement, Screen removal: 手順 5、 3の画像 1 Kyocera Oystr Screen Replacement, Screen removal: 手順 5、 3の画像 2 Kyocera Oystr Screen Replacement, Screen removal: 手順 5、 3の画像 3
    • Remove the phone's speakers by using the plastic opening tool to pry up and away from the device. These speakers will dangle by the wires attached to the board.

    • Use your fingernail to detach the ribbon connecting the board to the screen.

    • Remove the damaged screen from the device.

  6. Kyocera Oystr Screen Replacement, Completing the repair: 手順 6、 1の画像 1
    • Follow steps in reverse order to replace Kyocera Oystr’s screen.

終わりに

To reassemble your device, follow these instructions in reverse order.

David

メンバー登録日: 2011年10月04日

24 ポイント

2のガイドは作成済み

チーム

UW Stout, Team 5-7, Zhou Fall 2011 UW Stout, Team 5-7, Zhou Fall 2011人のメンバー

UWSTOUT-ZHOU-F11S5G7

2 メンバー

4のガイドは作成済み

2 件のコメント

My screen goes blank for days, then shows. maybe for minutes of seconds. Do I need to replace the screen, or is there a control I can try to bring back the display? The phone is charged and rings. Yours is a wonderful website. Thank you.

Martha Carnahan mpc@netsync.net

Martha Carnahan - 返信

My screen goes blank for days, then appears, but only for minutes or seconds before it goes blank again. Do I need to replace the screen, or do you know if there a command which would solve the problem? The phone is charged and rings.

Martha Carnahan - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 9

今までの合計 2,021