はじめに

A step-by-step rear camera replacement guide for the Kyocera Hydro Life smartphone.

  1. Remove back cover.
    • Remove back cover.

    • The back cover has a gap to grip when removing the cover.

  2. Remover battery.
    • Remover battery.

    • Lift the battery from the bottom of the phone to remove.

    • Using the eyeglass screw driver, remove the 6 screws.

    • Use PH00

    • Remove the white sticker.

    • Gently pry open the camera ribbon slot.

    • This won't take too much pressure to open.

    • Remove camera ribbon.

    • Be very careful not to rip the ribbon. Use tweezers if needed.

    • Carefully pry to loosen all 4 corners of the motherboard to remove.

    • Remove all ribbons in order to remove the motherboard.

    • Remove the black sticker.

    • Be careful removing, because you will need to place the sticker back on once you have replaced the camera.

    • Remove the camera.

    • This step requires breaking metal.

    • Only cut along the camera square.

まとめ

To reassemble your device, follow these instructions in reverse order.

Morgan Marshall

メンバー登録日: 2018年09月21日

277 ポイント

2のガイドは作成済み

チーム

University of North Texas, Team S2-G6, Riccardelli Fall 2018 University of North Texas, Team S2-G6, Riccardelli Fall 2018人のメンバー

UNT-RICCARDELLI-F18S2G6

4 メンバー

7のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 22

過去 30 日: 29

今までの合計 52