修理を始めるには コミュニティ ストア

Kurio 7 Motherboard Removal Guide

はじめに

Once we have opened the Kurio 7, we may need to remove the motherboard in order to reach other components so that the Kurio 7 will work.

必要な工具と部品

  1. Kurio 7 Motherboard Removal Guide, Back Panel: 手順 1、 3の画像 1 Kurio 7 Motherboard Removal Guide, Back Panel: 手順 1、 3の画像 2 Kurio 7 Motherboard Removal Guide, Back Panel: 手順 1、 3の画像 3

    • Begin by removing the rubber cover from the Kurio 7.

    編集

  2. Kurio 7 Motherboard Removal Guide: 手順 2、 2の画像 1 Kurio 7 Motherboard Removal Guide: 手順 2、 2の画像 2

    • Remove the four 30 mm Phillips #00 screws from the outer case.

    編集

  3. Kurio 7 Motherboard Removal Guide: 手順 3、 2の画像 1 Kurio 7 Motherboard Removal Guide: 手順 3、 2の画像 2

    • Insert the plastic opening tool in the gap between the front cover and the back cover of the device.

    • Slide the plastic opening tool around the edge of the device. Gently pry apart the tabs that hold the front cover and the back cover together.

    • Be careful not to break off the tabs that hold the front cover and the back cover together.

    編集

  5. Kurio 7 Motherboard Removal Guide: 手順 4、 2の画像 1 Kurio 7 Motherboard Removal Guide: 手順 4、 2の画像 2

    • Once all of the tabs are removed, the back cover should come off easily.

    • Gently remove the back cover. There are wires inside that may get caught on the cover while removing it. These wires are soldered to their components and are difficult to reattach.

    編集

  6. Kurio 7 Motherboard Removal Guide, Kurio 7 Motherboard Removal Guide: 手順 5、 2の画像 1 Kurio 7 Motherboard Removal Guide, Kurio 7 Motherboard Removal Guide: 手順 5、 2の画像 2

    • Use a plastic credit card, or other thin object, to separate the battery from the screen.

    • Be sure to work the card carefully and slowly around in order to not damage, break, or deform the battery.

    • Carefully set the battery aside.

    編集

  7. Kurio 7 Motherboard Removal Guide: 手順 6、 2の画像 1 Kurio 7 Motherboard Removal Guide: 手順 6、 2の画像 2

    • Use a Phillips #00 screwdriver to remove the eight 40mm screws holding the motherboard in place.

    編集

  8. Kurio 7 Motherboard Removal Guide: 手順 7、 3の画像 1 Kurio 7 Motherboard Removal Guide: 手順 7、 3の画像 2 Kurio 7 Motherboard Removal Guide: 手順 7、 3の画像 3

    • Place the plastic opening tool on the base of the black ribbon clip and pull up, like a lever, to release the mount. This should release the clip holding the ribbon to the mount.

    • Pull the ribbon out of the mount.

    編集

  9. Kurio 7 Motherboard Removal Guide: 手順 8、 1の画像 1

    • There should be masking tape on the yellow ribbon. Pull the tape off of the motherboard and wrap it around the yellow ribbon.

    • Do not pull the tape completely off the motherboard, as it is used to protect components on the ribbon.

    • To remove the ribbon from the mount, follow the same steps in Step 3.

    編集

  10. Kurio 7 Motherboard Removal Guide: 手順 9、 1の画像 1

    • Pull back the ribbons and put the battery near the bottom of the Kurio.

    • The motherboard is now removed so that other components can be worked on.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

作成者

11人の作成者と共同で作成されました。

Eric Rice

メンバー登録日: 04/14/14

913 ポイント

3のガイドは作成済み

バッジ: 20

+17 個以上のバッジ

チーム

Cal Poly, Team 12-36, Maness Spring 2014 Cal Poly, Team 12-36, Maness Spring 2014人のメンバー

CPSU-MANESS-S14S12G36

4 メンバー

14のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 7

今までの合計 3,461