メインコンテンツにスキップ

Kolcraft Cloud Plus Wheel Replacement

必要な工具と部品

  1. Kolcraft Cloud Plus Wheel Replacement, Wheel: 手順 1、 2の画像 1 Kolcraft Cloud Plus Wheel Replacement, Wheel: 手順 1、 2の画像 2
    • Applying too much force to the spudger can cause the spudger to bend or the hubcap to break. To avoid this, try prying the hubcap from a different angle or positioning your spudger at a different points around the hubcap.

    • Use the spaded side of the metal spudger to pry off the small black hubcap on the outside of the rear wheel.

  2. Kolcraft Cloud Plus Wheel Replacement: 手順 2、 2の画像 1 Kolcraft Cloud Plus Wheel Replacement: 手順 2、 2の画像 2
    • Pull on the looped end of the cotter pin to remove it.

  3. Kolcraft Cloud Plus Wheel Replacement: 手順 3、 2の画像 1 Kolcraft Cloud Plus Wheel Replacement: 手順 3、 2の画像 2
    • Remove the metal washer by sliding it off the axle.

  4. Kolcraft Cloud Plus Wheel Replacement: 手順 4、 1の画像 1
    • Slide the wheel off of the axle.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Christopher Peterson

メンバー登録日: 10/01/15

330 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 11-1, Forte Fall 2015 Cal Poly, Team 11-1, Forte Fall 2015人のメンバー

CPSU-FORTE-F15S11G1

4 メンバー

3のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 9

過去 30 日: 37

今までの合計 4,264