メインコンテンツにスキップ

Kolcraft Cloud Plus "Free-Stand" Button Replacement

必要な工具と部品

  1. Kolcraft Cloud Plus "Free-Stand" Button Replacement, "Free-Stand" Button: 手順 1、 2の画像 1 Kolcraft Cloud Plus "Free-Stand" Button Replacement, "Free-Stand" Button: 手順 1、 2の画像 2
    • Unscrew the two, 27mm Phillips #2 screws from the back of the “Free-Stand” button case.

    • You may want to flip the stroller over to access the screws.

  2. Kolcraft Cloud Plus "Free-Stand" Button Replacement: 手順 2、 1の画像 1
    • Remove the back cover of the case by lifting it straight up.

  3. Kolcraft Cloud Plus "Free-Stand" Button Replacement: 手順 3、 1の画像 1
    • The spring may pop out while removing the "Free Stand" button, so lift the button slowly to avoid losing the spring.

    • To access the spring, remove the red, "Free-Stand" button by lifting it straight up.

  4. Kolcraft Cloud Plus "Free-Stand" Button Replacement: 手順 4、 1の画像 1
    • If the spring does not come out when you remove the "Free-Stand" button, lift the spring out of the case so it can be fixed or replaced.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Christopher Peterson

メンバー登録日: 10/01/15

330 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 11-1, Forte Fall 2015 Cal Poly, Team 11-1, Forte Fall 2015人のメンバー

CPSU-FORTE-F15S11G1

4 メンバー

3のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 4

過去 30 日: 29

今までの合計 1,248