はじめに

Back Cover Teardown guide must be used first to get inside the camera. Later, soldering guides will be used.

Remove the two 6.2mm Phillips screws on both sides of camera's back cover.
  • Remove the two 6.2mm Phillips screws on both sides of camera's back cover.

コメントを追加する

Turn camera so the bottom is facing up and the front is facing away.
  • Turn camera so the bottom is facing up and the front is facing away.

  • Remove the two 6.2mm Phillips screws on the bottom back cover of the camera.

  • Back cover is now unscrewed an can be removed.

コメントを追加する

  • Have the back of the camera facing up.

  • Unscrew the 6.2mm Phillips screw next to the viewfinder.

  • The back cover is now unscrewed. Lift up and pull the cover off evenly.

コメントを追加する

  • The capacitor is located at the bottom center of the camera.

コメントを追加する

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Michelle

メンバー登録日: 2011年04月04日

86 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 25-28, Garner Spring 2011 Cal Poly, Team 25-28, Garner Spring 2011人のメンバー

CPSU-GARNER-S11S25G28

4 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 7

今までの合計 1,739